Recent content by PatentGuy

Thank you, and yes not thinking that one is QH compatible. Was hoping someone here would know.

Of the many that are out there in the $200 to $300 dollar range, none seem to be stated to be QH compatible. Thus I was wondering if anyone has actual knowledge. Thank you!

Had the same coolant loss after each 4 hr use - about 2/3 of the reservoir. Never saw a leak. Tightened lower radiator hose after reading this thread, no more loss. Wish I had read the thread about the Deck casters falling off and getting mowed after the pins pop out. Replacing with bolts and...

Well I had the dealer order a pair of rims from the ZD 300 series that I believe will fit 26/12-12 tires, thus the standard for ZT's. Was looking for recommendations with something like a Carlisle Trac Chief which appears similar to a R1 vs. the Carlisle HD Field Trax which appears "knobby"...

Take a look at Hardee brush tiger.

Keep the old machine as you say. I have a ZD1211 and 20+ degree slopes. The ZT is unmatched for open and relatively flat trimming and tight flat spaces. It is also fine going up and down 25 degree hills when fine control isn't required, but unless you have space at the bottom of the hill to...

I have a Kubota lx2610 so 20 pto hp, operates a del morino ditch bank flail with hammers just fine. Loaded tires and 0.5" spacers. The flail is the 52 or 54" model, can't remember which. It is the middle one they make of the light weight ditch bank mowers, funny super I think. It can handle up...

The Brush Hog 6ft RFM I had was rear discharge, left a gorgeous cut on uneven yard, and was built as thick and heavy as a rotary cutter. If only my tractor could have pulled it faster. 25 hp not enough if you have hills.

I believe the frame and forks from Artillian will be the lightest you will find, likely also the priciest. Very nice product and the frame can be used with many attachments thus obtaining more value.

Would be great to hear how the chevrons and fill works out and thanks for your experience regarding air vs. solid fronts. I asked the dealership about filling the rears and he said you didn't want to do it as it had broken some machines. I presume they wouldn't warranty, but do not know that...

You are welcome, first time I ever posted photos. Hope your delivery is rapid, but have waited months myself for parts also. Fortunately, none critical.

Hope that helps, if you need something else specific, please let me know.

Well only one seemed to work, will try again.

Here is what my install looks like.

Could not get to barn today, had a downpour and everything turned to squish. Understood on the missing parts but I'll still try to get you some pictures. You can see how my dealer set it up.