Yes. Like the image I sent (which is for newer models of the RX, not sure what year it changed). My image the only one that is needed is the short hardline on the left side of the image. I believe its the same for the pic you provided. You only need to change the short hardline on the left.
I will have to take some pictures of the wiring. Right now its still a bit loose. I had some difficulty threading the wires through the stick. I had to remove the rubber covering on the black wire to get it through. So I put some heat shrink tubing on the connections but haven't sealed it yet...
Yup. I had both in mine as well. From what I can tell there is nothing different.
I got mine installed and it was mostly painless. The hardest part was taking off the old joystick from the lever assembly. That nut and stick both had red Loctite. I feared breaking the cast metal lever assembly...
Hey Everyone,
Adding this in for the community. I called up my dealer to find out where the Tractor P and T ports are which connect to the diverter valve. I posted some pictures here for anyone looking to do this on their own. You have to remove the hard line but you will need to reuse the...
Is there a different part number for the RXA111 3rd function if you have an Open Station vs Cab?
I bought the RXA111 and I have an open station but can't seem to validate if anything would be different than the cab version. All the documentation is for a cab.
Hi Everyone,
I know there are a couple of threads regarding the 3rd function for the 7320 but none of them have specifics on the install process. Yes I agree the picture instructions are essentially worthless so hence I need the help. I know others have requested this recently as well.
I am...
Yes it would be good to see multiple pictures or even video of where the lines connect to and how it functions with the joystick etc. The WR Long pics in zip file only go so far.
Thanks for sharing. It would be good to give them feedback for them to include written instructions with more detail. Hopefully they will enhance that in the short term.
Question: What is the going rate these days for the Kioti version of this kit?
Update: I put grommets on the pin handles and it solved a good deal of the noise. But upon further inspection the main issue is with the loader level indicator. The rod rattles like crazy inside the shaft. Will have to think of something for that. I may just take it off.
I really wanted the RX7340P but they didn't have any in an open station, only cabs and they didn't have an ETA on when they would be available. So I got the 7320 with hopes that after 10 years of production they worked out all the bugs. :)
The tolerance is so tight on the pin that i dont think plasti dip will work. I put 1 layer of electrical tape in a spiral pattern and the areas that overlapped didn't allow the pin to fit. Really a bummer. Never had a tractor that did this.
I know this is old but I figured I would reply here rather than starting a new thread.
As a new RX7320P owner this is the first thing I noticed that bothers the heck out of me. These pins rattle like crazy above 1900 RPM. I did wrap electrical tape in an attempt to fill the gap for the main...