oldnslo's latest activity

What you are describing in the function of a 4 way - 3 position valve. Mobile versions may be called 6 way - 3 position since have flow...

If you leave the deck on you will need some long ramps to get angle low so the deck doesn’t catch or high center when loading if not...

I suspect the deck is wider than 50” even with chute deflector tipped up or removed. If backing on be sure to tie the hood down so it...

Is the plow built in a way that you can simply unbolt one bottom? That might be easier than adding weight.

What are the hydraulic issues that you are experiencing? A fitting that keeps leaking vs the HST doesn’t operate properly. To me this...

If the sound doesn't change with rpm or hydraulic load, probably not the pump

Do you have hydraulic schematic for this circuit? Just curious since not familiar with an unloading circuit that allows hydrostat to...

I have seen them in use but never owned or operated one. My question is what prevents them from tipping side to side if not on level...

What do the switches activate to disable the hydrostatic transmission and allow the tractor to free wheel? Is there some type of...

Keep your existing tractor for working in the woods since cabs and woods don’t mix to well.

LHF Thanks for posting those diagrams on how this circuit functions. It looks like the high pressure relief is a semi-special relief in...

There is a post in the Branson section of this forum with service manuals. I believe Asteral (spelling) started the post. Suggest do a...

Since not sure what the schematic or circuit looks like I am only guessing but suspect the intent of the screen is to catch debris in...

My semi educated guess is that the check is pilot operated via a pilot piston so flows in both directions. This flexes the screen...

Not familiar with Yanmar but on a lot of different brands there is a knob usually located below the seat for controlling how fast the 3...