oldnslo's latest activity

Well I don't know about "simplest things first" in all cases. We all do things in our own way I guess. I look things over first before...

If is two separate pumps then there is possibility of pump drive failure like stripped splines on input shaft. Agree we are missing to...

It's not a tandem pump. It's two separate pumps on a tandem drive with a common suction. There is (probably) a mid mount loader valve...

I'm not sure why you would suspect a suction leak as both pumps share a common suction and the steering/transmission pump seems to work...

Mud, Harry is correct on needing someway to verify flow in the system. From you have described there are two potential flow paths for...

You're just running in circles with what you're doing and wondering what to do next. What you need here is a flow meter, not a...

You don’t have lakes and beaches in Kentucky?

Your machine but if mine a pair of tin snips would trim that cover back to where you could get access much easier.

Why are you trying to slide that u-joint cover back? The silver ring at the end of the PTO is what slides to connect the shaft to the...

Simple test to try if it implement pump is accessible. Try operating a function like curl fully and hold joystick in that position and...

Since neither the FEL nor 3 point is working checking the system relief would be next logical step but a little unusual for relief to...

Lifting crooked would point towards potential of one of the lift cylinders leaking internally but that shouldn’t cause any sponginess...

Long shot but can you check Kubota or Deere models of similar size to what tires are offered. If have same size R1 or R4 and offer R14...

Off the wall thought but can you check the temperature of the pressure line to the loader valve vs power beyond and tank. If, repeat if...

That model may have the regenerative dump option which speeds up the dump by 30 - 40%. Soft or spongy normally indicates that air is...