nyone's latest activity

I have also had compressor seals leak and condensers have holes that where 2 weeks old. In fact I replaced the condensor 3x on one...

It sounds like the system is working. Maybe not working well but working. Are you sure the evaporator and condensor are clean and...

I havent but that is my favorite type of pour spout. I even have a bunch of VP raving fuel jugs. The problem with them is you need to...

Presses are alreaty really top heavy. You go adding more weight and making it roll may no be good. Just think it's going to tip over...

Considering the white rope broke in 2hrs I think we are going to find abuse of the cable. Also if your wire rope broke do not use...

Does one end have a hose clamp? It's hard to tell.

They sold tons of these TC series machines with the japanese engine. And I bet there are still tons running around every day. My machine...

Theres a saying that goes for a $20 tree you want to dig a $40 hole. This means the better the hole you put the tree in the more likely...

I dont believe that crack would cause a blown head gasket or to get coolant in the combustion chamber. Depending on the price of a...

Everyone that's willing to learn or do things them self is in over there head at some point. It's how you get out of it. If your going...

Is the compressor turning?

For yours..if that jack is welded on I would recess the 2in reciever through the front lower bar. Weld it to the lower bar and the...

Never needed to located the compressor relay for a completely drained system. Did it drain out by its self? If so just add refridgerant...

A flail mower does alot better job than a rotory cutter on grass. Where they dont and a rotory shines is woody thicker material. I...

Why do you need to dig the stump out? Would grinding it be good enough? I was clearing a site for a small cabin with my 3,500lb mini...