number two's latest activity
-
Nnumber two reacted to 3930dave's post in the thread Your last generator Maintenance Run with
Good Post.
Would work best in an enclosure, but if you can get the gen "wrapped-up" well, these may help. I have older versions of the 333 unit... -
NGrowing up my dad had a ford 2000 super dexta that had that exact linkage. A cable from dash cut the fuel. Remember him telling me to "...
-
NThe older machines with manual fuel shutoff do not have this problem. Keeping things simple (K-I-S-S principle) is an advantage for...
-
Nnumber two reacted to mike69440's post in the thread I hope I can prevent this from happening to other operators. with Good Post.
I got my original hardware back that was removed and replaced with the Superduty stuff. I wonder if these items can be resold to third...
-
Nnumber two reacted to Gordon Gould's post in the thread I Thought I Could Smell a Mouse with Good Post.
Yes I know. We used to have 3 or 4 outdoor cats all the time, and if it was up to just me we still would. But, now we just have...
-
Nnumber two reacted to Gordon Gould's post in the thread I Thought I Could Smell a Mouse with Good Post.
^^^^ It is doing super - Not a hint of mouse. A real pleasure. I've keeping a couple traps in it and they haven't been touched. Been...
-
NAbout 15 years ago #1 Son needed me to help with some weekend work about 2-1/2 hours away. Did a number of weekend trips there. Late...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Loading up some hay this morning… Then over to another customers place early afternoon to mow a small field. And now some...
-
NEvery storm is different and eventually you will get good using what ever you decide to get. Heavy machines with chains will always work...
-
NNOOOOO! No ether on any Kubota!
-
Nnumber two reacted to Gordon Gould's post in the thread Broke my B26TLB rear axle shaft with Good Post.
Ouch - but it sounds like you have a very decent dealer. gg
-
Nnumber two reacted to Lavender Valley's post in the thread Fixed - Grease zerk replacement. with Good Post.
Thing to remember, most pins may only do a quarter turn in their lives. For my front-end loader, I removed each pin and created a groove...
-
Nnumber two reacted to D&D's post in the thread Wood chip ground cover and trail building with Good Post.
If you have or can borrow, a small manure spreader will also spread mulch/chips. I use a top dresser for mine
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Now see that is smart. Instead of paying a mowing contractor, let a farmer HAY it instead. In MY area, it could be a problem if someone...
-
Nnumber two reacted to Rustyiron's post in the thread The Life of a Custom Mowing contractor with Good Post.
I wonder if a soil sample (or a annual series) would help your argument for a hay cutting next season. I know the cut grass is feeding...