number two's latest activity
-
NI have a Kubota HST60 with a 3 point 72" snowblower on back and a 10' snow pusher on front I use it on my farm in northern Minnesota and...
-
NOther ideas: 1. If you have a lot of time before has to be loose, can apply penetrating oil on it repetitively. Try to move it each...
-
NI don't have one of these FEL's nor a photo, so don't know whether any of these methods could be used: 1. Years ago, used a hand held...
-
NInterestingly enough, I just finished removing a seized bucket pivot pin from the end of my model 7 John Deere backhoe dipper stick last...
-
Nnumber two reacted to Hersheyfarm's post in the thread Any experience here changing out a kubota mini pilot control hose? with
Good Post.
I’m pretty sure now i found the leak. It’s one of the gold plungers. Looking around the internet for a disassembly vid, no luck. Pretty... -
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
I live in the kind of small town where one of the talented elders dies, there’s no yutes to replace them.
-
Nnumber two reacted to BufordBoone's post in the thread Fixed - Grease zerk replacement. with Good Post.
Fixed! I took the pin out and used a wire coming in from the back side to clean the area out. A couple times of doing that and using...
-
Nnumber two reacted to ultrarunner's post in the thread Fixed - Grease zerk replacement. with Good Post.
Rotating to different positions has also worked… There was an old estate drive gate not opened in years and it wouldn’t take grease…...
-
Nnumber two reacted to ultrarunner's post in the thread Fixed - Grease zerk replacement. with Good Post.
I’ve had some difficult ones on antique cars and machines… One was a bear so I used a hammer driven greaser with mixture of kerosene...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
More baling today Kind of a sad story, but the man who lived in the brown house passed away at 74 from a sudden massive heart...
-
Nfriend of mine in late 70's has resorted to Tesla's driverless functions. personally i would never resort to that option, although...
-
NA CPAP or APAP makes a big difference. Since getting an APAP back around 2011 falling asleep at the wrong times has not been a problem...
-
NI also used to have trouble getting drowsy while driving when I was a teen, even into my early 20's. Then things reversed by my late...
-
NWow, Eric glad your OK and just some pain which hopefully goes away soon. I am the same age and have 2018 Tundra 22K mi, really like the...
-
Nnumber two reacted to oldnslo's post in the thread Yanmar SB60R Front End Snow Blower with Good Post.
Does the drive shaft slide apart? If yes have you confirmed the phase angle of U-joints is correct? Most shafts only fit together one...