number two's latest activity
-
NIf you look at the parts diagram, there is an end projection just past the 30mm threads that looks like a hydraulic bump stop. I wonder...
-
NYes, that is the same thing that my Kubota dealer told me. My tractor was also out of warranty - but only by a month or so. They said...
-
NI've had a few of those. In each case, I pulled the pin and removed the rock-hard grease from the passages in the pin. The zerk usually...
-
NIs it possible it's a drive in zerk..??
-
Nnumber two reacted to redman135's post in the thread Fixed - Grease zerk replacement. with
Good Post.
Are you able to slide the piston partly out and pump grease in to blow the blockage out, then push the piston back in? Some times a pin... -
Nnumber two reacted to toot77's post in the thread Kubota LX2620HSD with 5' rear snow blower? with Good Post.
My $.02 worth comes from my experience in a snowbelt in western michigan with lots of everything from wet & heavy to light & fluffy lake...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
No on-board engine. There isn’t an engine powerful enough to power-up a big square baler. Generally, they need a minimum of 200 PTO HP...
-
Nnumber two reacted to EddieWalker's post in the thread I hope I can prevent this from happening to other operators. with Good Post.
I'm sure there is a lot of science and education that goes into placing every screw in there, but to me, it looks like a high school kid...
-
Nwow was that hydraulic filter a mess. Might have been the original. @2885 hours on the clock. All systems operate so much better, smooth...
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with Good Post.
They are getting out of letting customers use them due to liability they say, there are 2 other outfits in my area that have done the...
-
NSeveral months ago I bought a Toyota Tundra with a little over 40,000 miles. I really liked the truck even though it was hard to park...
-
Nnumber two reacted to Runner's post in the thread Owning a small tractor is a blessing. with Good Post.
You can move furniture with them too!
-
Nnumber two reacted to Yander's post in the thread Owning a small tractor is a blessing. with Good Post.
My buddy bought a safe a few months ago and had no idea how he would get it up the four steps to his house. It was a...
-
NIf you are intent on pushing that much snow and if you end up with huge ocean fed dumps of the white mold, a rear mounted 8 foot...
-
NI have been watching tractors of all sizes and frequently see 100+ HP tractors sell for less than new pint-sized 35HP compact tractors...