number two's latest activity
-
Nnumber two reacted to elsievo's post in the thread Bercomac SSQA snowblower experiences with
Good Post.
Yes, I have to put it on and take it off as the plates that hold the blower on to the tractor replace the ones for the mower. Then there... -
NYou could always order a new cylinder intact....about $4K. A seal kit is $250. As far as I know there never were any specific boom...
-
NThe pins are bound up on both sides of the bucket weldments UGH. You are going to have to have the bucket weldments and the cylinder...
-
NBased on cost of kWh hours all in including taxes and fees. At 50 cents a kWh 360 kW a month is $180… I have coworkers easily paying...
-
NAdd kids and dogs, coming in an out all day..... I can add to that list....like dogs opening a sliding door on 95 degree day while no...
-
NI built this 2400 sq/ft. house W/basement and insulated it as best i could afford. All the lighting is LED, electric range, cooktop, 2...
-
Nnumber two reacted to rneal55555's post in the thread Kubota LX2620HSD with 5' rear snow blower? with Good Post.
I think you'll be fine, I have a 64" blower and it works just fine my TYM T264 here in sorta central New Hampshire. I just got it last...
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
Most of the time it is the head coach. Sometimes it will be the school board. It sort of depends on who is paying for it. Sometimes...
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Go up early this morning and headed over to get some pesticide to spray for army worms today and came home with a used fertilizer...
-
Nnumber two reacted to mike69440's post in the thread I hope I can prevent this from happening to other operators. with Good Post.
I underwent a third operation on my poorly healing bones. Hopefully this much hardware will allow what bones remaining to fuse. My leg...
-
NIf the water level drops below the sensor it won't register the high temp. Plus... .
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Back to a little baling today. First bales of 2nd cutting!!! Here we go again! First a little raking. Then its go-time with the...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Another crazy day…. Started with loading some bales. Here’s (2) more 1800 pounders on the forks ready to go on the trailer...
-
NSee what your customers contractual conditions are. I think that much of the commercial work in today's litigious society, commercial...
-
NI am, yes. Massey Ferguson 7495 Pennsylvania I fabbed-up a Western Heavyweight from a large dump truck to work off my front 3-point...