number two's latest activity
-
N102" pusher here (18" short of 10') on a 5 ton SS and chains on each corner. So much depends on snow consistency and your use. That...
-
Nnumber two reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with
Good Post.
Today's job was a little bit of residential forestry mulching, forgot to take any before pictures but I did get a couple of after, hope... -
Nnumber two reacted to Carl_NH's post in the thread Part number lists for Kubota Wholegoods with Good Post.
Here's a link to Messicks BH77 parts list. If you need a hydraulic line, you will find it in the parts list Kubota BH77 (7.7 FT BACKHOE)...
-
Nnumber two reacted to Wagtail's post in the thread best electric pressure washer-expert recommendation to choose with Good Post.
I've had an electric Karcher powerwasher for 13 years now. I bought it because the 'internals' are brass, the Karcher brand is used by...
-
NJD 7200, hot day, air conditioning did not work but oh well, husband is tough, going to pick some bales, Just down the road the tractor...
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
First thing was lip removal. Then we added 2 loads of material to the skinned area. Then laser graded the skinned area.
-
N1 qt to 30 gallons. Good lube quality and solvent enough to keep things clean.
-
Nnumber two reacted to RollTide1962's post in the thread Fuel Tank Removal and/or advice on cleaning with Good Post.
Hi nyone, Thank you for the suggestion. Here is what I ultimately did - this is for those who run into the same issue. Problem...
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
The one in the foreground is a 2022 Ram 2500 with the 6.4L Hemi. It has 85k miles on it and I am considering trading it in for a...
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
Not really a good pic, but lots of equipment loaded up for tomorrow.
-
Nnumber two reacted to tracter's post in the thread best electric pressure washer-expert recommendation to choose with Good Post.
Just make sure whatever brand you buy has a Brass pump not plastic/composite or some material with a short life Oz
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
They say….. Too much noise to make hay v. rotary mowing Nobody wants me to access the field over their precious yards. Strangely...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
There isn’t a person alive in that community with the b@lls to cut the steep slopes they have. Probably not the even the flat areas, for...
-
Nnumber two reacted to civilian's post in the thread The Life of a Custom Mowing contractor with Good Post.
@EddieWalker The cost of the mowing has just been shifted to someone else. But if you consider the time savings you get if someone else...
-
NI'm not really sure, but I suspect it's a combination of things related to fuel traveling from the tank to the filter base. I never see...