number two's latest activity
-
Nnumber two reacted to masseyrider's post in the thread I Thought I Could Smell a Mouse with
Good Post.
I almost cried. There's a video of a Ford GT packed full of rodent crap and nuts. The owner died and the family left it outside for lie... -
NMom's boyfriend had his old dodge truck sitting for a week while he waited for a part to come in. A week later he put the part in and...
-
NI believe Gene Hackman's wife died from that and he died from needing the care she provided.
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
You can see this field had lots of ripples in the outfield. Spreading sand with the blade can sometimes be a lower cost way to fix these...
-
Nnumber two reacted to Shawn T. W.'s post in the thread Regret not getting a backhoe for my tractor with Good Post.
I got mine from BXPANDED ... The "Quick-On" makes swapping things a breeze ... Slide red pin in notch, pivot purple up and slide in pin...
-
NIt’s a Kubota. They make some of the best small diesel engines on the planet and then habitually put them into their equipment with a...
-
Nnumber two reacted to bdhsfz6's post in the thread BX engine almost stops on big bounce with Good Post.
Could be a partially clogged fuel filter in combination with the seat safety switch.
-
Nnumber two reacted to BleedingOrange's post in the thread BX engine almost stops on big bounce with Good Post.
It sure sounds like the seat safety switch to me as well. If you want to test the seat switch, pull the plug apart under the seat, and...
-
Nnumber two reacted to JimBinMI's post in the thread 2014 BX1870 Steering Frame Broke with Good Post.
I didn’t keep good track but think I could have done it in 8 hours, 6 now that im trained! 🤣
-
Nnumber two reacted to sergeant285's post in the thread Kubota BH75 bent bucket cylinder rod with Good Post.
Sorry for the delay on an update. I got my backhoe back going, and I had projects. I wound up using a 2x18 cylinder from Magister. $232...
-
Nnumber two reacted to DieselBound's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
I never trust numbers, for numbers sake, from a compression test as there are many things that can affect them: a cheap tester...
-
NGot the canopy put together and installed this evening. Its a red rooster canopy. It has a much more simple angle adjust/ removal set...
-
Nnumber two reacted to JTKub's post in the thread Thoughts on cost of big roll-up barn doors with Good Post.
If your talking a commercial style metal roll-up that you can drive a tractor-trailer through, those are more in the $5-7k range.
-
NWe saw at the beginning of all this something about borrowing gauges. So far, no report on how that worked out. Just a lot of "it might...
-
NAre you saying the clutch drops out after the compressor runs for a bit, or are you saying the whole thing locks up solid and stops...