I switched from an ASV RT60 tracked machine to a PT1460 and have no regrets. 1850 with duals should be even more stable. I don't spend much time on real steep stuff, but most of my time is spent on stuff that was pretty spooky on a standard tractor. Undulating terrain is where the PTs shine...
My pt1460 is 79" tall. Best machine decision I've made. Had a pt425 for a couple of years then got a tracked loader for the heavy stuff, picked up the pt1460 this year to replace the pt425 and tracked machine and have no regrets. I've had standard tractors, near impossible to think about...
The 1460 I recently purchased came with the utility grapple that I'm not going to use, already have a grapple.
Wanted to see if anyone wanted to trade for/towards a Mower/Bush Hog/Power Rake/ or other 1460/2460 attachments?
Let me know what you have. I'm just north of Charlotte, NC. Willing to...
PT425 with bucket, 60" mower, bush hog, mini hoe, forks, and hitch adapter
I believe it is a 2013, has the robin engine with ~1200hrs, other than the bucket, the attachments have been used very little.
Located just north of Charlotte,NC
I believe it is a 2013
Anyone familiar with the bigger machines know if there is an easy way to add a case drain connection? Is there a case drain off of the wheel motors? I would like to be able to run some of my skid steer implements that require a case drain.
I found a pt1460 so it is time to part with my pt425. I'll try to get pictures this week.
$15k has the robin engine with ~1200hrs, other than the bucket, the attachments have been used very little.
Located north of Charlotte, NC
Quick update:
It was not the ignition switch, it ended up being the positive battery cable, it had corroded at the post connection. It did not look bad enough to cause an issue, but the corrosion had gone under the cable jacket.
More details regarding the symptoms in case anyone in the future...
Starting to think it is the ignition switch. I continuity checked it and it checked out fine but when I reinstalled it, in the on position, I checked the voltage across going to each terminal and I'm getting a fraction of a volt. Full 12.5v coming into the switch from the battery.
Ordered one...