muncybob311's latest activity

I wish my tub was THAT clean!! The only time I have fluid mess is when changing filters other than when both front wheel motors broke.

At times I wish I had spent the extra $$ for the 425. A larger mower deck would cut down on the 2.5+ hours it takes to do a complete...

Never realized lubing that should be done. Will clean and lube today for hopefully an improvement if I don't melt first :)

So after 1400+ hours float is not working correctly. The slightest bump in terrain pops it out and now I also notice when lifting the...

WOW! I want one of them!!!

Peter, +1 on the grease. They get a good dose every 5 hours of tractor use of which 75% of the time is mowing in spring/early summer...

I must admit I didn't go ape with the rubber mallet. I watch the force I use on things I haven't worked on as I have learned my lesson...

I would try those except there is play in the bolt. I can pull it out about 1/2 an inch and it rotates. I'm going to try the other wheel...

Here is the bolt and nut. Nut comes off easily enough.

So I wanted to remove a front rubber wheel to untangle some string that got wrapped around the axle bolt head. Got the nut off and as...