MinnesotaEric's latest activity

My understanding is that 12 new nuclear power stations have been green-lighted.

While my bum knee is on the mend, I did replace the seal today. I couldn't get a seal pick or something like it to pop the seal out, so...

Thanks for posting as this thread is the forum equivalent of one hand clapping. That said, if you've held Bitcoin for one year today...

I've been very happy with my SpeeCo CAT2 quick hitch thingy. I bought it years ago from a fleet store online. Here is a Cat 1 SpeeCo...

Go to a busy boat launch, and comedy will ensue from those who just don't know how to back up a trailer.

So, popping everything apart is child's play. I first foam-cannoned the underside to get rid of any poison ivy oil. I then pulled the...

By jumping battery hot (the starter has 12v positive) to the solenoid, you're asking the solenoid and the bendix to work. If the...

FWIW, a guy can bench-test a solenoid with the starter removed, and it will work, but it will not work when under a load. FWIW, I see...

I have the same issue right now with my cabbed HST NX. I had the hood up, it rained, and now no start on the ignition switch. To start...

I thought they would use electric powered generators.

I ordered the seals and on Ruffdog's suggestion, tonight I leaned it up against a tree.

Mandate citizens to rub balloons against their heads to charge the grid, I imagine.

The two bolts were used to fasten my puller to the stump jumper. Then my puller pushed against the center of the gearbox shaft.

According to Woods, you are right, there is a new triple-lip seal that fits in place of the old seal (p/n 39289), and the part number...