MinnesotaEric's latest activity

Nothing is needed inside, the seal goes in from the outside. Just make sure the replacement seal is the newly designed "triple lip"...

"Twigs" was used as a slang term when I was picked up large chunks of windfall birch trees.

I had the same problem dealer found out it was a sencitivety switch on the hydrastat pedal they put a spacer somewhere to correct the...

Looks like a common roll pin to my eye. I have an entire kit of different sized roll pins I got from Amazon years ago. Measure the one...

What ever you get, get high-flow hydraulics. High-flow makes the machine more useful on the attachments you can use and adds to the...

I need to remove the gearbox so I can replace whatever is needed inside. That said, I'll find out how I need to hold the cutter from...

Sadly, I've already looked at that switch and connection.

Already looked into replacing it- I wondered if the spring was weak. Couldn’t find any available sadly. It turns out that the tension...

Nicely done, Eric. Thanks for posting this. BTW, I noticed the manual side link on the right-hand lift arm in one of the pics. Didn't...

I still have a top link, but the hydro side link turned into a hassle for what I use my tractor for. Eventually, the bottom broke off of...

I'm not familiar with your tractor's steering, but as you suspect, it sounds as though the spool valve isn't centering. Once...

Yet the war against rodents continues to wage on... LOL

Matt at Boyer Mechanical in Bemidji was able to cut down the weld, source new seals, and weld up my old cylinder for $135. Call that a...

The bottom seal on my rotary cutter is so bad that even grease leaks out, and both the nut and stump jumper on the bottom of rotary...

Mechanic clean shop dark arts: drop some mineral spirits onto that mess and scrub it in with a stiff shop broom and allow it to dry as...