MinnesotaEric's latest activity
-
MinnesotaEric reacted to Jstpssng's post in the thread 12 States to ban diesel vehicles with
Good Post.
We'll do it the modern way. All of our food will be grown in other countries and deliveries will be done using magic. -
MinnesotaEric reacted to anomad's post in the thread I'm guessing this is a scam site - MarshallTractor.com with Good Post.
Good call. That is hilariously fake. This listing has mantouhire.com.au stickers on it and those are eucalyptus trees in the background.
-
MinnesotaEric replied to the thread SSQA Snow/dirt plow blades.Get a V-plow with a trip for snow.
-
MinnesotaEric posted the thread Milwaukee 3013-20 Telescoping pole saw replacement chain in Parts/Repairs.I have two Milwaukee 3013-20 telescoping pole saws, and they are awesome using good Chinese 9 or 12A M18 battery packs (I use Waitey and...
-
-
MinnesotaEric replied to the thread How do you clean your greasy loader pivots?.IMO electric grease guns stink because you're still using those lousy 20oz tubes of grease. Either a bulk air-driven grease gun or a...
-
MinnesotaEric reacted to mikester's post in the thread M59 Help: Dealer Wants $6K to Replace the Wiring Harness with Good Post.
Another suggestion: clean up everything and look for dodgey homebrew wiring. WTF is that loose red wire down below doing? Why is your...
-
MinnesotaEric reacted to KWentling's post in the thread M59 Help: Dealer Wants $6K to Replace the Wiring Harness with Good Post.
I urge you to set up a test light to replace the fuse. It's the way the pros find shorts. Easy to do. No more feeding it fuses. The...
-
MinnesotaEric reacted to mjonesnh's post in the thread How do you clean your greasy loader pivots? with Good Post.
used that in a gauge shop where .00005 tolerances were the norm. went through gallons of that stuff in 17 years I was there. Definitely...
-
MinnesotaEric reacted to Wagtail's post in the thread How do you clean your greasy loader pivots? with Good Post.
In all of the years that I've my 4105 (new, Feb '13) I have never cleaned any of the excess grease resulting from a grease nipple/zerk...
-
MinnesotaEric reacted to hiddentacocatneddih's post in the thread How do you clean your greasy loader pivots? with Good Post.
Pump more grease in and leave it. Grease prevents rust
-
MinnesotaEric replied to the thread How do you clean your greasy loader pivots?.Cleaning? Denatured alcohol. Buy it in 1-gallon cans and load into spray bottles. It removes anything "greasy" and is way, way cheaper...
-
MinnesotaEric replied to the thread Starter help.I tend to agree with you that it is something stupid. I have tested the control lead to the solenoid, and there is no signal. I've...
-
-
MinnesotaEric replied to the thread Adjusting Kioti RX7320PC Lower Links.Yes.
-
MinnesotaEric replied to the thread Starter help.Since misery loves company.... Some time ago, I had my tractor up at my Tinkerage to do the major hy-tran service and to puzzle out a...
-
It looks like the bakelite housing will come off the back of that solenoid. You should be able to take it apart and clean the copper...
