Recent content by Kyjimblair

The bucket tries to move as I crank the engine. I have not tried the auxiliary to see if flow is present.

My 732 bobcat has a hydraulic problem. When I'm trying to start the engine, it pumps the hydraulics and puts too much load on the engine. What makes it bypass so I can start the engine ?

Point gap is .025, new points and condenser from bobcat. I have put oil in the cylinders , did not improve compression. the spark is weak when cranking, but Has a spark. it could be wiring, when cranking the voltage should be more than the six volts while cranking. I’m trying to find wiring...

I turned the motor over by hand Having an extra spark plug attached to the number one plug wire it fires as soon as it reaches 12 degree mark. also it is on compression stroke on number one cylinder. Just before it reaches the top of cylinder. also rotor is pointing to number one in the...

I have a 732 with Ford 1.6 engine , cranks good but won’t start. just wondering if you got it running and what you did.

I’ve read so many articles of no start for a Clark bobcat Ford engine , but I don’t read how they repaired the problem. new points set at .025 New zenith carb New plugs New coil Timing set at 12 btdc Compression is low , but should at least try to start (1)105 (2)80 (3)80 (4)75