Not sure the title is totally correct but I have a leak that started in the transmission case where the draft linkage lever goes in. Looks like one bolt holding the linkage to the shaft.
Anyone had this and how hard to fix?
2013 DK40SE HST
Looking at a good way to cut the edges of my fields (under tree branches). Would a 7 ft 3pt sickle bar be the thing to use? Will it cut small bushes/trees that are up to an inch diameter? Tired of having to duck around branches and having branches tear up my signal indicators on the fenders...
UPDATE: Thanks all for the replies.
I always clean the screens , both hood and the removable ones in front of the radiator, after every mowing session because of it getting clogged up with the grass tassles (seeds).
What I have been neglecting is blowing out the fins of the radiator from the...
Starting to mow my fields down here in TN. A little bit warmer than when I usually do it later in the year but need to get all the fields mowed since I will be out west most of all Sept.
Anyways after mowing a bit my temps are going up on the my DK40SE, I have attached a pic of the temp gauge...
Haven't posted on here in a long time, tractor has been running great. Well that didn't last, my DK40SE HST has a coolant reservoir tank that is leaking. It is leaking at the molded seam of the tank. Doesn't leak a lot just seeps out but enough to leave a decent spot on the floor overnight...
OK, So I have typical symptoms of a fuel issue with one exception. First the symptoms
Tractor bogs down when under a load, going up a hill and/or brush hogging, to the point it will die if I keep pressing it. Even a sharp turn (guessing steering pump load) will bog down the rpm's when brush...
Been using the tractor last couple weeks to brush hog my fields. Today I went out and cut one small one then moved over to another small one. Tractor starting to bog down with any type of load on the bush hog (think grass)about half way thru this field. Running it at the red mark (2500 rpms)...
I am trying to help my neighbor, older gentleman, with his Ford tractor. The 3 pt will lift and stay up, but it won't hold what I call any of the draft positions (between full up and full down). Any position other than full up and the 3 pt will settle all the way down.
Anyone with one of...
First time at planting a couple food plots on my land in TN.
I started by spraying the ground in Jan, turned them with a 2 bottom plow in feb and limed them.
Bought a tiller since we will also be putting in a garden
Then tilled them in late March and fertilized and tilled.
The result so...
Got the oil changed first thing this morning and then went and finally bought the 3 pt tiller I've been wanting to get. Got it back to the land (currently building a house down here in western TN) and tilled up 2 food plots then went over and tilled my neighbors garden for him. Neighbor is...