K5lwq's latest activity

Yeah, thanks. I do like the 4020, and will be keeping it. It'd just be nice to also be able to pull the Rhino mower behind the smaller...

The 5520R you're looking at provides just that. H pattern synchronized gears on the main 1st to 4th gears, and H pattern for the range...

Speaking of the 4020 (and other JD tractors of that era), I've always thought it was pretty cool that the classic Nelson "rain train"...

The 4020 is probably the best tractor JD ever made and could be the best overall. I would not be replacing that tractor.

Only if it has a "creeper" range in addition to the normal Hi Med Lo.

Yes, good advice, but... I really, really, really want to buy a tractor with that good old mechanical injected Kukje/TYM engine. That...

This debate never gets old. 😂 I am in the gear camp. I never have found myself changing gears a lot or wishing for more gear options...

Well I've made some progress over the last few days; It became even more interesting when my new tubing was about 3/8 inch taller then...

First test with the new to me plow. No adjustments made whatsoever and the ground is very dry and hard for this but still fairly...

Got a really nice deal on a nearly brand new trailer and 12" plow for the Branson. Implements from 2004 but very well taken care, very...

Well my "little" whops from the other day is going to be fun...

Thought would update for others that might have this issue Symptom - No cold AC, compressor clutch does not engage Troubleshooting 1)...

To the bolded, viscosity breakdown will lead to louder clacking so I don't think your ears are playing tricks on you. On a related...

You could remove the left lift arm side link and drill another hole about an inch above the bottom hole. Then use this new hole when you...

I'm not too familiar with tractors other than my own, but I thought it seemed to have a good number of adjustments, incl. the side to...