Joe Hickerson's latest activity
-
JJoe Hickerson reacted to RandyMelton's post in the thread Mahindra 2538 front loader pin vibration with
Good Post.
Hey everyone, I've been searching for a simple solution to the problem of the front loader pins on my Mahindra rattling so much when... -
JJoe Hickerson reacted to dodge man's post in the thread trail clearing technique and tools with Good Post.
Watch out for that pack of wild dogs Arly. ;)
-
JJoe Hickerson reacted to ArlyA's post in the thread trail clearing technique and tools with Good Post.
Some blazing was done on Boundary Road trails this morning. The mutt crew, not all seen here. Isabel in 4th one showing Frank where...
-
JJoe Hickerson reacted to skipmarcy's post in the thread 3510 Front inner tube recommendations or 'No-Flat' fill product? with Good Post.
Are you sure the rims & tires are correct for your loader tractor ? My 4110 came new with 12- 16.5 NHS R4 10-ply tubeless tires...
-
JJoe Hickerson reacted to ruffdog's post in the thread Check light on with higher temperature with Good Post.
Yes^^^^Then, if that dirt/dust gets wet and is left between the fins, then it is much harder to get out. That is why it is important to...
-
JJoe Hickerson reacted to RjCorazza's post in the thread Check light on with higher temperature with Good Post.
Definitely clean the radiator fins first, before throwing parts at it. There are some very effective tools available to flush the fins...
-
JJoe Hickerson replied to the thread Check light on with higher temperature.My dealer recommended 50:50. Fairly standard in our area of northern Michigan as it can hit -30 to -40 occasionally. I have a 2017 eMax...
-
JThose bundled eyelet grounds can bite you, especially if you live in the rust belt. Like you say, It may look good at a quick glance...
-
JJoe Hickerson reacted to duffer's post in the thread 2012 Mahindra 4025 4X4 Left brake grabs with Good Post.
While I don't own the same model as you I suspect the design is similar to several models. On mine, there is a "brass" looking rod on...
-
JJoe Hickerson reacted to Harry in Ky's post in the thread 2012 Mahindra 4025 4X4 Left brake grabs with Good Post.
Are the discs actually oily when you take them out or do you merely suspect a problem in that area? If so, you probably need new discs...
-
JJoe Hickerson reacted to BnRidge's post in the thread trail clearing technique and tools with Good Post.
The previous owner here mowed 7acres, with lots of open space, and boulders trees and shrubs to go around. First time out I set a...
-
JJoe Hickerson reacted to EscapedSuburbia's post in the thread trail clearing technique and tools with Good Post.
I stopped by a Stihl dealer today and bought a commercial level trimmer. He had to order the cam-lock head. He says in the 25 years...
-
JJoe Hickerson reacted to ArlyA's post in the thread trail clearing technique and tools with Good Post.
We run echo and stihl power heads and on them, run heads that hold 155 strings. These are that machines you can switch out the tool...
-
JJust checked my 2538 (same as yours only earlier model) and the wire from the ECU doesn't go back to the dash panel, but rather down to...
-
JThx much for the reply, I actually traced the wire, it appears it goes to that stack of wires on the rt side frame to ground but doesn’t...