JeffinNB's latest activity

I imagine you could squeeze a couple more HP, not much, but with some smoke most likely. They used to make a 2800 (28hp) model in the...

Does anyone know if the power from the A1100N2 in the 2400h can be turned up by adjusting the screw on the injection pump?

I rekeyed the ignition switch on my 2400h today. When I bought the tractor 3 weeks ago it only came with one key. I bought one of these...

I've so busy I forgot to post some updates and pictures. Got the pad all finished and finally got my shop built. Shops 20x25 lean is 10x25.

Congrats, you got yourself a nice tractor for cheap despite unraveling all the mickeymousing done by the previous owner.

Great work on troubleshooting this one out Jeff. You really had to go arms deep on this one but you figure it out. I suspect this...

Jeff Great job on diagnosis and thanks for posting the solution.

Solved! The main spool has another rather small spool inside it that in my case was stuck. Cleaned it well and reassembled. Lift arms...

Well looks like the main spool on my position control valve is leaking by. Going to pull it apart again and have a closer look at it...

The lift arms stay in position until I lower them. There is no leakage by the piston. I plan to shim the cover with 2x4 and run it. I...

Moving the spring got my 3ph positioning working. I can now control the positioning fairly well. It still requires about 1400 rpm to...

I found a receipt from 2019 where he bought a bucket of Duratran oil, FE9105 and TA069864 filter. I'm just waiting on the dealer for my...

Well I pulled the hydraulic cylinder case again this evening. I may have found my position control valve issue. Someone was in here...

I know this is an old post but I have a manual for my 2016 SL00 loader and thought I'd post the specs pages. The manual says printed...

Does your 2400h go the same speed in reverse as it does forward?