Harry in Ky's latest activity

  • H
    Harry in Ky replied to the thread JD 5105 not staying primed.
    Have you confirmed there's power to the injection pump solenoid? That's another issue these tractors are well known for. Totally...
  • H
    You might try loosening or even removing the cover on the back of the valve spool. It's not unheard of for the centering springs in...
  • H
    Harry in Ky replied to the thread New Holland TN65 PTO problem.
    There is nothing hydraulic about your PTO. It's strictly a mechanical clutch. There should be an inch or so of free play on the lever...
  • H
    Harry in Ky replied to the thread Fuel problem 4035.
    The shut off solenoid could always fail without notice, but it's rare. That style will have a rubber plunger on the end that blocks fuel...
  • H
    Sorry, but that's not much of an explanation of what took place. What "remote"? Is this a factory remote valve stacked onto the side of...
  • H
    Harry in Ky replied to the thread Ford 3610 hydraulics..
    You need to locate and obtain the power beyond sleeve mentioned in the text. The valve will then have three ports in use. The sandwich...
  • H
    Harry in Ky replied to the thread Ford 3610 hydraulics..
    Yes, that's it. Amazing what it sells for these days. I ordered dozens of them over the years and they were $60 or $70 each at one time...
  • H
    Harry in Ky replied to the thread Ford 3610 hydraulics..
    Your biggest problem is the diverter valve in your first photo. You should get rid of that, replace it with either a remote valve to...
  • H
    Harry in Ky replied to the thread 2600 alternator.
    Wiring aside, the Delco style alternator will not fit in the same brackets as the Motorola you removed. Save yourself the trouble of...
  • H
    If you've followed the existing lines, you know which lines go where on the tractor. (pressure in, power beyond, sump return) Those are...
  • H
    Harry in Ky replied to the thread Rockshaft to SCV conversion.
    Now that seems like some usable information. Even if the kits or parts are not all available, there should be information (diagrams and...
  • H
    Harry in Ky reacted to Spanner's post in the thread Rockshaft to SCV conversion with Good Post Good Post.
    There was a 'Kit' which is showing as NLA (No Longer Available). #BM16544 You may find a New Old Stock pack in a dealership somewhere...
  • H
    I would agree the compression tube fittings are probably the most "homeowner friendly" option. Flaring steel tubing would be my LAST...
  • H
    Harry in Ky replied to the thread Rockshaft to SCV conversion.
    I'm not sure what a loader/no loader would have to do with it. Seems to me you need to study the geometry of the current mower support...
  • H
    https://www.mycnhstore.com/us/en/caseih/na/tractors/agricultural/naaa01agr076hydro/international-hydrostatic-drive-tractor-na/superstruct...
Top