Harry in Ky's latest activity

Sure sounds like the dreaded thermister type of thing. Do a search for John Deere thermister problem and see what you find. Should be a...

Point noted.

Everybody has their own ideas about what's "the best" option. You will no doubt get a few in short order. No offense intended, but has...

Then you're pretty much stuck with what you have.

As I see it, he's on the right track. The problem will indeed go away. On someone's trailer.

If that's what's required he's better off mounting a sun shade on his zero turn and peddling this pile.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/3236/referrer/navigation/pgId/441219 Just ASSUMING here, this is what you...

Good luck with the head gasket.

Well we know a bit more now than we did at the beginning of all this. I came in thinking the tractor (probably) handled this load...

Okay, so what have you used this tractor for in the past? Your current problem is something that just now showed up? Is this 10 ft mower...

I'm not a pilot. I wouldn't know where to start describing mechanical problems concerning aircraft. However, I am a mechanic. Have...

I have a slightly different take. While I won't disagree with anything stated so far, one part of your original post has yet to be...

No, the pulley won't move. It's bolted to the crankshaft. The pump drive adapter will separate from the pulley. Or at least it SHOULD.

Using a diverter valve on the typical Massey lift pump will give you either external supply OR three point operation. You don't get both...

Do yourself a favor here. Tractors come in many configurations and the electrics can be quite different from one version to another...