Harry in Ky's latest activity

The 2120 is a better tractor overall (opinion sneaking in here) even though it's fifteen to twenty years older. Much simpler design...

There has to be a seal on that end. On the Ford tractors that used steering cylinders similar to that the "stepped down area" as you put...

Nothing electrical unless it's a power shuttle. Your description of events kind of rules that out. There is one thing that comes to...

Lots of ideas out there, some I agree with, some I don't. Personally, I think you're spot on with your assessments. New is NOT always...

Suit yourself. You made the claim that there isn't enough travel to get the PTO clutch released and still have free play at the top of...

So it no doubt has at least one remote valve on the back, totally separate from the loader valve. If you plug your gauge (or A gauge)...

At this point no one knows WHAT'S possible because no one knows what you have. Is this a dedicated loader valve that has the problem...

I guess I'm just stupid, but I can't see where adjusting the rod is going to gain anything. If the pedal linkage design is wrong and the...

ANYTHING aftermarket is a crapshoot. I'm surprised that YOU'RE surprised it didn't fit. Try another supplier. Might get one from a...

https://www.mycnhstore.com/us/en/caseih/na/tractors/agricultural/naaa01agr089under100hp/international-tractor/hydraulics/hydraulic-pump-a...

I'm not talking about automotive type systems, mainly the tractor systems. In the automotive world the sheer volume alone dictates that...

Unfortunately, what took place "several years ago" may no longer apply. These days it seems all too many dealer shops have digressed to...

No matter who builds the engine, there is no comparison between the old "common sense" fuel system and the (highly touted) common rail...

Explain how you tried to "engage the starter manually". If you did that correctly and it still won't turn over, your problem is not...

Typical "chain of command" on those tractors is the start signal begins with key switch. One tiny wire from there leads to the PTO...