Harry in Ky's latest activity

Wrong fluid types can cause a few different problems, granted, but not that one. I've run across some Kubota couplers that leaked when...

This is testing voltage where? At the battery? at the starter? at the key switch? What counts is the voltage at the start signal wire on...

So this is an M100, cab tractor? Has a loader with mid mount cable controlled two spool valve under the right cab door? The hydraulic...

Lots of replies so far but not a lot of help yet. Why not start over. Tell us about the system, what went wrong to begin with, why you...

I think you're adding confusion to the situation. There's nothing wrong in adding a tee and pressure gauge (which as I understand it is...

I'm always in favor of a creative workaround to help beat the system. Been there, done that, more times than I care to count.

You claim the clutch and compressor are working, but your results don't confirm that. No matter how much refrigerant you add, if the...

https://www.pneu-draulics.com/ This is where I go. You might contact them with the sizes and dimensions of the parts you can't find...

I've never been to Hercules Seals, but from their website it looks like the sort of place that would have what you need. I'm wondering...

Pretty straight forward. Have done it a number of times. Plenty of instructions out there. Just stay away from the three dollar...

I wouldn't worry much about it. Personally, I get tired of all the comments I see involving "change the fluid and filter(s)" every time...

Why don't you try the basic test? Remove the signal wire from the starter. Put a short jumper wire on the spade and "jump" that to...

Maybe if you describe the symptoms more accurately it would help. "Seldom starts on first, second, third start" What does that mean...

Depending on how the starter is made you may not need to "find a wire". You can "double up" on the signal wire to starter, or maybe if...

Many systems do it that way with no problems.