Harry in Ky's latest activity

Many systems tie the pull coil to the start circuit. Engaging the starter activates the pull coil. When the starter is released the hold...

Maybe there's something else available that will fit. Seems there are all sorts of those things out there. Can't say for sure just what...

Well, sometimes one must get a little "creative" when dealing with things like this. Cut the connector pigtail off the old one, cut the...

Forty series SLE tractor wiring diagrams are in multiple pages. Some are in the electrical section of the service manual, some are in...

Are you sure you can't use one with three "contacts?" One of the three will most likely be nothing more than ground wire. You indicated...

I've never done it, but I suppose someone has. Would it be worth it? I guess that depends on how "it" price tags out. It would be a much...

You can't remove those bolts with extractors. That simply won't work. Your only hope would be working the housing off the bolts first...

Ihttps://www.mycnhstore.com/us/en/newhollandag/na/tractors/compact/naba17com0543cyl/3-cyl-compact-tractor/engine/cylinder-head-1710/cn/FE...

Not uncommon. Some of those older IH tractors can be a royal pain to get primed once you remove the filter and drain the housing. My...

Replace the gear and the shaft? Major project. And for what? A ground PTO feature that's (probably) never been used, and chances are...

Typically cylinder seals are not proprietary. People who build cylinders (and loaders) source them from what's commonly available...

Yes. Part number is 359293X1

Your symptoms indicate a possible slipping clutch, not a low power issue. The metalic sound you heard, could it have come from the...

As I see it, you have few choices. You live with what you have. You split it and go through the clutch.

I make no promises in that regard, but it looks like an obvious starting point.