I have already been out there running it. Yes I agree with you they are fun to run! Also the tractor has been a blast. Here where we live there isn't a flat piece of ground within a thousand miles (exaggeration) and the tractor hugs these hills like you would not believe.
Same configuration on left as the right. I'll check the interference issue first. Then, you've given me a couple of options as well and thanks. Before drilling I'll give the second adjusting link a try first :-)
I'm not sure I have the same options. There are only two hole positions and the lift arms are currently in the one closest to the tractor.
I'm not sure of the clearance with the telescopic activation handle if in the front position hole.
I'm not sure yet if they have multiple positions or as yours did, just for hooking up. New machine and the flail was hooked up when delivered. Will be looking into it.
I may be doing things wrong on my end as well. If I have the unit on the ground and adjust the top link to raise the front end so the blades are slightly higher. They're then is not enough travel to lift the unit off the ground high enough. The lower arms are not the issue but when extending the...
It does lift no problem. And I have the roller at the lowest point.
I'm working with the dealer and he is trying to find answers but in honesty he is new with this unit as well.
The specs were the confusing part saying 1" to 3". I'm shooting for 2" in my application of use. Native grassland...
Can someone assist me in getting my Del Morino adjusted for cutting height.
Per the specs it is adjustable from 1" to 3".
I want to be around 2" to 2-1/2" if possible.
I have the back roller at the lowest point, with the gearbox leveled with the top link the flails are 1” off the ground. I’m...