I have an intermittent forward drive problem with this tractor. Very low hours, shows up after tractor is worked and warmed up. It works great and all of sudden won’t take forward. Fwd icon on dash always comes on even when it won’t drive, reverse has never given a problem. Turn it off for 30...
Congratulations on the new tractor, have you had a chance to use the tiller yet? I’ve had to replace sealing rings on 2 1626’s they were cut from factory!
Have you had any updates? I have one with exact same problem and my bolts thru ring gear carrier to ring gear are all broke or backed out! Does not appear they were long enough to start with!
Intermittent no loader hydraulics until you work another function, I知 aware of the ball resolver circuit and have had valve out of machine looking for something wrong but the problem remains. Would a bad resolver oring on the backhoe valve affect loader valve?
As title states I have a spark problem, I have a service manual and going by it I checked voltage going to coil. I have none with the key on (manual says should have 30), and starting I have 30 (manual says should have 130). I dropped back to the trigger coil, the ohms on it are within specs...
I removed the injection pump from a LS190 NH for a rebuild of pump without knowing there is no positive way to reinstall pump in gear. They are using a setup much like old Cat stuff with just a taper on the shaft and inside gear with pressure from a nut that holds shaft in the correct place...
Ok, the badges say it's JD but we all know it's Yanmar.
Last thing on my list before calling this guy to come pick it up has me puzzled.
When in low range in any gear and push in the clutch pedal the tractor stops like you had applied the brake as well, no roll at all. I did find while trying...
Anyone on this board done this? Over the weekend I acquired a '95 3500HD GMC truck with a nice 11' utility body that I will be using as a mobile service truck. The truck has the much lamented 6.5 turbo diesel (which is blown, making the truck very affordable) and the 5-speed manual.
I found...
Hey folks does anyone have the torque specs (main bearing holders?, rod, head and valve specs) for a 2620 Yanmar tractor engine.
I dont have my info with me now and I've forgot what engine it has. Mabye someone can help? Thanks
Is there any Mitsubishi tractors that are better left alone, as far as parts availability?
I've had great luck with a Satoh Beaver but looking for a little more HP now.
Hello folks, I'm working on a L4200 4x4 that appears to have a leak where the driveshaft to the front wheels comes out of the transmission. What is involved in replacing the seal in there? Dont look like much room to be working in there. Thanks for any help