Recent content by fendmat

Hi i have a massey ferg 65 and cant find any info on hyd remote overhaul cant find any images of valve remote When rod was pulled out of remote body there was a oring in valve body On the rod itself was a clip on end then an oring but there was no orings on the other 3 grooves possibly...

Hi Dman thanks for that looking at pump they look exactly the same just have to take 4 bolts out of new pump to fit bracket and take the socket off new pump and fit my wheel It was just that the parts people said they only had pump to fit massey ferg 65 Cheers Ted

Hi i have a massey ferg 65 multipower and need a new hyd pump my question is does the 65 pump fit the multipower 65 there is a difference at the front and top which is bracket for aluminium block to sit on and a cog on front which i removed and looks like i could fit it on new pump parts...

Hi creamer thanks for reply i live in australia and i have gone to dozens of seal and oring places the problem is they dont carry these types of o ring because they are a square o ring and they tell me normal o rings wont do the job Does anyone over there sell a kit for it Cheers Ted

Hi i have a massey fergason 50A backhoe and i am after seals for 7 lever hyd valve body Thanks in advance Ted

Hi everyone seems a very good and informative forum Cheers Fendmat

Hi does any one in australia know where i can get o ring kit for massey ferg 50A back hoe with 7 spool hyd levers Tried sealco and othetrs but it appears all these o rings are square not oval Thanks in advance Ted

Hi thank you for that i will pull the valve body out Cheers Ted

Hi no there is nothing blocking the lever it just goes to center and when you pull it back to retract the leg it is real solid i gather it is in the valve body but have never pulled one down and i am not sure what to look for Cheers Ted

sorry the hyd lever is the problem it will work in one direction then back to center then wont go in opposite direction from the center Thanks Ted

Hi i have a massey 50A backhoe cant get the stabalizer leg to retract the lever will allow leg to go down but when you pull lever back to retract it goes to center then wont go any further as if it is seized every other control arms work perfectly Cheers Ted

Thanks every one for advice have decided to get original seals and fit them Cheers Ted

Hi i have a massey ferg 50A backhoe boom cyl have overhauled all seals but cant get the piston back in with new seals .Do you have to have some sort of ring compressor to fit ,have enclosed old seals on drum and new seals fitted on rod Thanks in advance Ted

Hi i have a massey ferg 50B back hoe and the left hand stabilizer lever will pull back but goes to center and wont go forward as if something is stuck in that direction thanks in advance ted

Hi i have a massey fergason 50A, backhoe, motor has been rebuilt and new injector pump put on has only done 30 hours since work was done and run very well was left for about 12 months and now cant get fuel to injectors have put high volume electric pump on and tapped on end of injector pump...