ernemats's latest activity

This has probably already been said, but 20" is about as long as I'd run on a 261. The oil pump will likely struggle to keep up on...

My son was doing some serious cutting with the Greenworks brushless 40 volt saw along with the pole saw.

My battery powered saws also have adjustable oilers. greenworks and ryobi

Have been down to Tazewell on about 6 different occasions and talked to him each time and talk to him quite often on the phone with...

I happened to be looking at YT videos today and look who I ran across—Terry from Power Trac! My wife and I had visited with him a couple...

Good point and I would add to that, it depends on what you use a saw for. Monday, we cleared a 500’ gulley of 4”- 10” cherry trees. It...

Hunting down a similar used variable volume pump might be possible, but of course comes with the caveat of "what happened to the donor...

Need to Plant that in Clumps, then Spark it up. A little "Controlled Burn" But the "Huggers" would disagree.

I have the 60 volt 20 inch bar and it is heavy also but it is very good at cutting larger trees and with the 8 ah battery it will cut a...

For my car port shed I used 3/4 inch 3 foot long mine roof bolts (from coal mines) pounded in by hand with sledge hammer , it has not...

How do you know what you are getting. Different ones I have looked at then ask if they are 1 or 2 coil and no one seems to know. Any...

I discovered a mouse nest in that spot, and their urine had rusted through the curved metal tube connecting one injector to the...

kind of adjustable handles did you use and where you get them?

My grandson came up with the same thing. Thanks Peter

Was mowing today on a fairly steep slope about 25 degree slope when it suddenly acted like it was low on fuel. Checked about 2 inches...