You nailed it ! I don't remember it going like that. I've got a red one going into a yellow and a yellow going into red . I always thought they were color coded for a reason .Like I said it's been a year, But hey it works, Thanks so much ! Don
Thanks Guy's for responding , I'm sorry for the late reply .. Been slammed ..Anyway as you can see from the pics I've got two rams one for to articulate the scraper up and down ..The other to tilt the scraper at an angle for fine tune grading .I have a electronic valve that diverts the fluid...
HI, My hydraulics for the box scraper aren't functioning properly .I had the box scraper off the tractor for about a year for backhoe work . now I'm struggling to try to figure out why? The hoses are color coated ..reversed them and still no go . I'm wondering if I have gotten air in the...
Well started at battery cleaned and tightened everything worked my up to the starter ,Put a tester on the hot wire going to the solenoid with the key on no power took apart the dash and cleaned the connections wiggled the key a bit and it started .Could have been a total fluke or more likely...
I didn't mention that someone told me that maybe my one of the filters in the transmission were totally plugged up and the sudden force of trans oil jammed up a sensor. .and locked up the machine .I did service the unit all new filters and fluid nothing . It kind of made sense but no joy...
Hello my issue is with my 05 4310 I tried to pick up too much weight in the loader, Bags of concrete on a pallet with forks when I realized it was overloaded I tried to lower it down slowly to remove some of the weight. about one foot off the ground. It slammed to the ground and now it will...
Hello, I'm experiencing Interment problem with power reverse not engaging .part #LAV10881 took it apart cleaned connections everything looks good reinstalled no go . Looked for bad wires, connections all looks good . code reads one long ,one short followed by six more short ones. Tried it again...