Anyone ever put a locking fuel cap on their tractor ?
I'm not so much worried about someone stealing fuel as I am them dumping water or something in it
When its parked off my property
Can anyone tell me what the upgrades were to this tractor?
I now own a 2012 DK40SE ,
Is there anything I should be aware of ?
I saw their were injector problems in the earlier years, anything on this model I should be aware of ?
I'm not in this situation . But have often wondered, if you cant get your tractor running, how would you load it onto a flat bad to get it serviced ?
I'm thinking a winch, but what about the loader, how would you raise the loader/bucket to get onto trailer ?
looking at the new dk35hst:
gross hp is 38hp, the pto is only 27hp. -thats 11hp less to the pto
the ck35hst puts out 34hp gross and 26.5hp pto thats only 7.5hp less
any reason to explain this ?
seems like the dk35hst doesn't transfer power as efficiently to the pto for some reason ??
What should I expect to pay for a NH 35D or 35DA equipped as follows:
4-wheel drive w R4 tires
16LA bucket
either 35D with 12x12 or 35DA with Hydro
I'm in PA - but I'm not sure how prices compare here to say neighboring states. I'm also trying to feel out new vs used prices.
Thanks for any and...
I am looking at buying a 14 acre wooded lot. Mostly some 7-14 inch trees and a good deal of brush. The land is relatively flat. I would like to cut a road into it and eventually clear 2-3 acres leaving several trees standing but removing some as well. Time is on my side as I would just want to...
I've been looking at and specking the TC30. I like the tractor - but the 7308 loader with only 875 lb lift seems to bother me. Does anyone have a TC30 with a BushHog M246 loader ? That loader specs at 1530 lb lift (Max height @ pins). Is this too much loader for the TC30 ? The M246 is a mid...
Went to the county fair (had to look at the tractors) and one of the dealers was showing off his static display of CUT with the buckets raised high in the air. Isn't this dangerous ? especially with little kids running about and around the tractors all day. Is it possible for the bucket to...
Looking into building a new house and buying CUT. I was thinking to help justify the cost of the CUT for the property, to buy before house is done - to do the final grading and backfiling/leveling of soil. I would have the contractor come in and dig foundation and remove topsoil from road to...
I have neven driven a shuttle shift tranny - My question is .. Can you vary the speed within a selected gear by using the throttle ? And if so - by how much ? I am trying to compare this to a hydro where you can vary the speed infinitely - and was wandering if you can vary the speed at all...
Anyone know about how much a bucket mounted snow blade would run for the New Holland Boomer tractors or a web site link to them ? I'm wondering if it is cheaper to get this instead of a rear mount PTO snowblower. Another option - buy a used truck snowplow and adapt to a quick attach and...
I don't want to start another war on hydro versus geared - but I do have some questions regarding the two. At low Rpm's - will a geared synchro shuttled tranny have more torque than a hydro tranny since the hydro wouldn't be flowing as many GPM at lower rpm ranges ?
Second question - if you are...
I have seen posts referring to widening the stance of the tractor by making the axles wider. Is this an adjustment on the tractor that is easily done or what are they referring to ?
I keep seeing the TC30 as the economical or entry point tractor from NH posted here - I looked through the specs - you can get most of the goodies - Hydro tranny, live independent PTO, all tire options, MMM, 4WD. I see it doesn't have the nice slanted hood - so what are the tradeoffs of the...