dieselscout80's latest activity
-
DI do the same. I have three towing trucks so any type of electronic setup would be challenging. Those point and shoot thermometers work...
-
Ddieselscout80 replied to the thread Hybrid Rotary Cutter Proof of Concept.I also used my IR temperature gun on the u-joints. The back one which was running the straightest was about 5 degrees cooler than the...
-
Ddieselscout80 reacted to EddieWalker's post in the thread Hybrid Rotary Cutter Proof of Concept with
Good Post.
I enjoyed the video and admired your skills fabricating the mower. I just don't see it doing anything in the video that looks like it... -
Ddieselscout80 reacted to nyone's post in the thread TC33DA - adding oil slowly to avoid engine damage? with Good Post.
Just did the oil change on my tc40 yesterday..and it didnt blow up. I just used a small funnel and greased the unit while I filled it.
-
Ddieselscout80 reacted to tacticalturnip's post in the thread How do you clean your greasy loader pivots? with Good Post.
As I said on GTT, I clean the excess grease off of my tractor by wearing my best shirt near it. It is guaranteed to work every time.
-
Ddieselscout80 reacted to TerryR's post in the thread How do you clean your greasy loader pivots? with Good Post.
I don't.
-
Ddieselscout80 replied to the thread Hybrid Rotary Cutter Proof of Concept.I tried mowing with my drawbar shifted to the left. It shifts the mower to the left 4” 5” and I noticed my PTO shield rubbed the yoke on...
-
-
Ddieselscout80 reacted to eKretz's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
An electric grease gun doesn't have a huge benefit for most homeowner size machines. But get a BIG machine like an industrial backhoe or...
-
Ddieselscout80 replied to the thread Kubota BX23S vs NH WS25s.Making sure you have access to a good quality dealer for your equipment brand is important.
-
Ddieselscout80 reacted to RayIN's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I still have my old compressed-air grease gun that fits a 5G pail of grease. No need for it now the haying equipment and feed grinder is...
-
Ddieselscout80 replied to the thread Where to go for rear tire replacement???.Around here there are at least two or more shops within 20 miles that will do it. The closest one will NOT do anything with more than...
-
DThank you for your attention to this matter! https://www.epa.gov/newsreleases/make-gas-cans-great-again-improving-flow
-
Ddieselscout80 replied to the thread TC55DA PTO lever seized up..The cab mount point was just an example of something outside of the PTO system and linkage that might cause the issue. Most newer...
-
DThe PTO lever moves a spool on the PTO valve. This spool, then redirects the oil either to lube the wet PTO clutch pack (PTO Off), or...
-
DI would add it to the truck and trailers. I have the GMC factory TPMS for the truck and all 5 of my trailers. It is great peace of...
