Carl_NH's latest activity

Same here dirtdogs - ordered that and some spare chains from Amazon.

Hi fellas! Obviously I've been getting a few messages from some of you about these saws so I figured I'd join up and introduce myself...

Here's a BX in CT with 60" deck, blower and blade 208 hrs for $12K Log into Facebook

There are a lot of good discussions here on these machines, but in general a BX would be better suited to all around use and...

So this one won't work 46928? Scag 46928 Wheel Hub

Agreed - to ask for money for a quote, that's absurd.

Robert Lee Ray in Albany GA gets good reviews as a solid dealer and they may be able to advise on a west coast dealer. Rippa Machinery...

George - its a diesel so there are minimal CO concerns. Not saying it has 0 CO, but it's very rare for diesel engines to create enough...

I started with my Cub Cadet 1811 (similar to the 445) with a plow and chains, for 8 years, then got my Kubota B21 in 2001 and rear blade...

Yes the 2563 should fit your L2250 but the loader comes off and the front blower and frame goes on - its appears to be a quite alot of...

I leave the caps on the valve until I want to use the auger or bucket. I have the hoses connected with a coupling on the Auger and...

Matt, I installed the 14MM QD like these 1 Set M14x1.5mm Hydraulic Quick Connect Coupler Female Thread Pipe Fitting8G | eBay so I could...

Looks good from here - and you have a cart to load rocks and stuff! I got the same plate and found a bolt on hitch plate from off TEMU...

You are fortunate to have a known machine, so inquire when they last did the major service? Typically (300 hours) is Hydraulic SUDT and...

OK so it started now with a puff of black smoke, which is normal in the first few seconds after starting. I suspect it was the plugged...