Recent content by BRCOL

Thinking about converting the 210TL to SSQA. It would require fabrication of a plate for the loader side as there is only 1 center mounted cylinder to curl the bucket. Anybody else done a conversion?

Last winter while blowing snow in my NH T1110 with "original tractor cab" soft cab, I had a few issues with the glass (real glass) fogging and frosting up. I have thought about installing a universal heater kit to help with that problem. The company linked below is great to deal with, is...

All of the GM 6 speeds are a bit problematic. They need specific trans tunes and a good convertor to eliminate the problem. A lot of the "hot rod" guys that are pushing them were puzzled for a long time, I can't remember who, but someone on one of the pages finally found the issue: GM...

I could see that, I just don't have any that I need to do that near. My 7 acres might have 3' of total elevation change. :D

I have a New Holland T1110 which is a 29hp rated model with turf tires, MMM, and FEL. I don't have any weight on the tractor itself and use a Woods RBS72p blade. It has the bolts as you originally mentioned for "tilt" as well as side to side adjustment. It covers my wheel tracks when angled...

Hey all, I just noticed today that the Shibaura Sticker on the top of the engine says its rated at "UP to" 29kw, which would convert to 38hp. I can't seem to find any information on different pump settings, or injector sizes that would increase it from the rated HP of 29 to 38. Anybody have...

My dad has a Rotary 2 post rated at 12k. My brothers and I purchased and installed it for him. Between him, and my brothers there is ALWAYS someone using that hoist. One of those things we did without for years, and once we had one, we’d never go without one again. 2 post works better for what...

I bought a RB72p blade last week and was able to spend about 4 hrs working my driveway this weekend. I’m glad I got the 72” for the application. I was easily able to pull the 72” blade full of gravel in the straight and angled positions in 2wd. I found this new 2019 blade at a dealer that used...

Thanks for all the replies so far. As a couple of you have noted this tractor is quite lightweight and so is the blade I picked. Tractor weight (minus the loader and MMM) is around 1500, and the RBS60 blade is quite light at 160ish pounds. Is 60" blade right sized for a 28 flywheel HP...

$.07/kwh for my geothermal system, and $.12/kwh for everything else in Iowa. I am a rural customer with a local energy Co-op.

I have a NH T1110 that I plan to do some light dirt work and gravel driveway grading. I was looking at the Woods RBS60 blade for this work. Anybody have a Woods Blade? any feedback?

I just bought a used T1110 with a 836GS blower (60"), a 230GM deck, and 210TL loader. I don't yet have an owners manual, but I am under the impression that these have a grid heater that is active for 10 seconds while cranking? Good place to buy User and shop manuals? I've looked online...