Recent content by bjorn773

Thanks. It will be going on the JD445 as I don't have a mowing deck for the L2250. I've got 6 suitcase weights and a front weight bar, so should be good there.

I purchased a leaf collector yesterday on marketplace. The best I can tell is that it's the JD Tilt Dump MCS. This particular model has the gas engine off to the side to run the blower, not the pto driven blower. It was mounted on an X730 I believe, so the included brackets are not quite the...

I have a pretty short driveway, so the blower is likely overkill. I've been using a skid loader with a hydraulic plow to clear mine and the neighbor's (who has a much larger driveway than me). Honestly, the skid loader is overkill as well (for my drive anyway). I have 7' rear blade for the...

I have an old L2250DT with a FEL on it currently. I am looking to pick up a snow blade or blower. On MP in my area is a B/L2563 which looks like will fit per a google search (please correct me if I am wrong). It is currently mounted on an L2900. I have a few questions I'm hoping the members here...

Can someone running a snow plow on their loader provide feedback on how well it works? I have an L2250 with FEL and am contemplating mounting a snow plow from my skid loader on it. The plow works great on the skid loader, but that's all I use it for. I'm thinking about selling the SL and fitting...

I picked up a used bucket that came with a bolt on tooth bar. The teeth don't butt up against the bucket cutting edge. Is that normal or do I need to mount if further back.

I just purchased an old New Holland L555 and the tires are pretty worn out. I have some old tire chain sets I found in my shed and am wondering if anyone has had any luck with chains on a skid steer. I realize I will eventually need to buy tires. Just looking to get by while my bank account...

I am trying to find a freeze plug heater for my L2250. I have read that the block plugs are not located between cylinders and therefore too shallow. Where is the best location for a heater on this engine?

We are clearing invasive honeysuckle and buckthorn on our property. It has completely taken over the understory. I've been using my Kubota to knock over the clusters of honeysuckle which pops the root ball out of the ground. Then I can get the bucket under them and lift. However, I have already...

I know this is a tractor site but I don't know where else to post this question. I own 20 wooded acres and am clearing quite a bit of it. The L2250 that I own is not really heavy duty enough to handle removing some of the stumps. So, I am looking for a used skid steer and leaning toward...

I found an old Brinly Hardy moldboard plow in my pole building today. Initially, my thought was to sell it on CL. I don't really know what they are even used for, but if I did maybe I might use it. We live on 20 acres mostly wooded and are clearing a lot of invasive buckthorn and honeysuckle...

I am just not trying to hook up a Speeco Cat 1 quick hitch that I purchased last winter used. I am having a heck of a time getting my Woods brush hog to hook up. I welded some ears on the top link attachment arms to rectify an interference issue I was having with the top hook on the quick hitch...

Once I can get to the serial plate I will start trying to locate a replacement.

I was brush mowing in the woods on my property today when my left front spindle broke. The ear for the tie rod end is not only broken off, but missing somewhere in the woods. It has MFWD and I'm guessing this isn't gonna be cheap. So I have 2 questions... 1 is it worth renting a metal detector...

I know this is not technically an attachment, but can anyone ID this chipper. There are no markings other than the Kohler engine. I think it might be a Mobark... not sure