Recent content by binaryviking

I think that's probably about right, 7-8 gallons

Update: So I finally was able to find the needed adapters to attach my flow control valves. I had to mount them by the hydraulic shocks because there wasn't enough room in the valve box once the adapters and valves were included . I had the flow set to 0 when they were once installed and opened...

Thanks for this!

Ok they have been canceled. I'm going to visit our local tractor shop and see that they have.

Thanks for the information. So these are the adapters I ordered for the control valve below.

Ok thanks for all of the help , I really appreciate it, Helped out tons.

Ok , So I would have to get adapters for this 1/4'' flow valve to fit my "5-JIC" fittings, which are 1/2", correct?

So I have a 68 Massey Ferguson 150 that has a 3cylnder diesel . and I bought a BH8600 backhoe attachment for it. It came with a PTO pump. I let the the company I bought it from know about the swing problem and they said the only solution was for them to send me a smaller PTO pump which I really...

So from what I was told by the guys at the tractor shop when I brought my hydraulic hose to them is the the hose fittings were "5-JIC" and after some more research and talking with Granger Supply they told me I needed a control valve with 1/2" NPT ports. I was going to get it from them but there...

Thanks, that's some great information. So you are saying I should have 2 control valves placed like the picture below? Also , here are the specs on the valve, I believe my backhoe is max 2000 psi and 5-6 GPM Needle Valve used to provide flow control and shut-off in either direction. Max Flow...

Hello All The left/right swing on my new backhoe attachment is way to fast, everything else works fine. I was considering getting this adjustable flow control valve and putting it in right where the hydraulic hose hooks up to the controls for my swing , and then attaching the hydraulic host to...

Hello I just purchased a BH8600 backhoe attachment and could not find anything in the manual on what the Hydraulic fluid capacity was for it. I'm running it off of a pump that is hooked up to my PTO. I contacted the distributor and he had to check on that also and I haven't heard from them yet...