bdhsfz6's latest activity

This onesey, twosey pedal thing has been discussed here many times. It really comes down to personal preference and how you use your...

There are many ways an implement can get hydro bound. Temperature change, bleed down, implement shifting, etc. To ease the problem, I...

Ya, seems that root type grapple with some tree grabbing length might be best. Kinda like seen here.

FWIW, around 10 years ago, I was approached by ROW agents from a wind farm construction company. Part of my acreage is on a hilltop and...

I've owned seven tractors since 1979, 6 with HST. No trans trouble in over 10,000 hours. I burned out the clutch in the one gear tractor...

That hasn't been the case with any of the three Kubotas that I have had. In low gear, thy have all been able to spin the tires without...

For the op's stated concerns, the choice is HST.

I’ve seen a lot more threads with seized or burned out clutches vs HST problems. HST transmissions are for the most part very reliable.

I have a Blue Diamond Heavy Duty 72" grapple I use on my L6060 and MX5800 tractors...

Every time I go to the Kubota dealer, I eye that RTV-XG850 they have on display. It sure would be fun to run around the estate with it...

Try and center the trunk in the grapple as best you can. Trying to pull one when clamped outboard of the FEL arms could bend something...

An interesting solution that I will try even though I have a tree/post puller.

I leave the hydraulic lift link on all the time. To compensate for bleed down, I use a manually adjustable lift link on the opposite...

I use relatively inexpensive and easily obtained Jeep wrangler mirrors...

I have a TnT kit on my MX5800 and frequently need the two remotes for other implements. For short duration use, I disconnect the hoses...