Recent content by Adryan

Hello, Does anybody know If the GR2110 and the BX2660 have the same rotation direction of the mid PTO? Regards, Adryan

I use the BX for spraying the cherries, red curants and the strawberries, and for mowing between them. Mowing between the strawberries is a 6 kilometer drive...

Just hit the 500hr mark on my BX2660. So far no pain, only had to change the booth on the HST fan...under warranty, and a new fuel filter. Today changed the oil in the front axle and drive train. After changing the oil it's much more quiet! Guess we get used to the HST noise... On to the...

Hi, After 350Hrs I've got my first problem with the BX.:confused: Today when working on the field (with a 3pt sprayer PTO driven) I had a sudden drop in RPM. It happend about 10 times during the hour. I really don't know what is wrong with it. When it dropped in RPM I disengaged the PTO but it...

Hi, I just want to share some modifications I made to my BX2660 I wanted to add on some front weights without drastically modifying the front guard. just look at the pictures. I use the quick connect bracket from the MMM to secure the weights. Also installed a speedometer for using my...

I just recieved my new MMM 54" for my BX2660. When I try to install it the bracket at the front doesn't line up. Sure, I can force it in position, but then it only holds the deck on one site. I've included some pictures. Is this normal and should I just use it this way?? Adryan

I know this has been discussed many times... I changed the factory transmission oil in my BX2660. After searching the web I found many sources for the oil Kubota...UDT (but they dont produce it) Shell...Spirax S4 TXM Q8...T2200 BP...Vanellis the factories all have a web app. were you can...

Hi, I just want to check if this is normal, my 3PH drops about 2"/hour when a load of 350lb is lifted. The tractor is bought with 35 hours on it (2011 model) My 30 years old Iseki doesn't. Perhaps this is normal for a BX??? Perhaps another owner can tell me how his BX works? thanxs in...

Hi, I need to put 3 aditional electric switches on my bx2660 to control my sprayer. Been thinking about puting a plastic box somewere to put the switches in. Question is perhaps one of you has a need solution for the locationof the switches?? ...not much room for switched on a bx...

I'm thinking about installing a 3rd function on my FEL. I've seen several posts about it, but has anyone actually installed one on a BX? Some pictures might be helpfull, especially from the valve. Rgds, adryan

Hi, just recieved my 2nd hand bx2660 with only 28hours on the clock! I have 2 small problems with it, perhaps someone can point me in the right direction.. First the 3ph doen't lower enough for me. Is it possible to rotate the uperlink arms a bit (they are on a splines shaft) so the lower link...

The new BX2350 has 25.2Hp in Europe. The engine is the D902. Why would one buy a BX2660 if the new BX2350 has the same Hp??? The abrupt stopping had been solved changing the gasstrut linkage to the HST pedal. the real question for me is should I choose an BX2660 or the BX2350? perhaps you guy's...