ning
Elite Member
Precisely.The NATO cans don't screw on, they have a lid with sort of a cam-lock to hold the lid closed or to clamp a spout on.
Thank you for your valuable addition.
Precisely.The NATO cans don't screw on, they have a lid with sort of a cam-lock to hold the lid closed or to clamp a spout on.
Which one? I want to get one. Lifting oil buckets 5 feet off the ground and precisely pouring them sucks.I use a battery-operated liquid transfer pump, no lifting no spilling.
Reducing gas can flow to a pathetic dribble helped nobody. True and it caused INSTANT GROUCHINESSSaw this, great news. Reducing gas can flow to a pathetic dribble helped nobody.
So wait. They are only directing the manufacturers to specifically add vents again. So potentially increasing cost a little bit. And you still must have the spring loaded nozzle? ugh
Glad I have all my old cans around still. You can pry them from my cold, dead hands.
I like the cheap chinese garbage for fuel and DEF but the one time I tried it with hydraulic oil it couldn't do it.Which one? I want to get one. Lifting oil buckets 5 feet off the ground and precisely pouring them sucks.
The battery lift pumps I saw were either $20 chinese garbage or $1,000 made in Sveden.
You could have charged an EV at home, overnight, much easier. Never be at the mercy of someone else’s working hours.Back in the day when I had a long commute, there were no gas stations in my rural area that were open early or late. I would sometimes forget to fill up on the way home so as a backup, I would store some gas in a 150 gal skid tank by pumping it out of the 40 gallon tank on my pickup. That way, I would always have a supply on hand for my small engines, as well as my vehicles when necessary.
I most certainly would have done just that if EV's had been available in the 1990's.You could have charged an EV at home, overnight, much easier. Never be at the mercy of someone else’s working hours.