If you have Toolcat questions, ask them here...

[ruffdog]

My ToolCats hours display is acting up, flashing and giving me inaccurate hours. It went down from 2700 to 1010.

Here is another thread about the hour meter acting up:

Hour Meter

 

[Cskidmore]

I can give you all the info.

UFM82

2009 toolcat 5600 not driving but all hydraulics working any ideas

 

[EyelashViper]

2009 toolcat 5600 not driving but all hydraulics working any ideas

If the hydraulics are good, did you check the drive belt?

 

[ruffdog]

If the hydraulics are good, did you check the drive belt?

That belt drives the hydraulic pumps so if it breaks, all hydraulics would be dead. I would suspect the F-N-R switch.