John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,689
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
I'm not sure. My understanding is that it is percent of total weight. However, at one point there were competing methods of measuring moisture content: one was measuring as a percent of total weight, the other was expressing the weight of the water as a percent of the weight of dry wood. The latter always struck me as odd for two reasons:Thanks J_Mc. So is it percent of total weight that is water or is there some other parameter or constant involved ??
- You don't really know the weight of the dry wood until you actually dry it all the way out (and who ever does that?)
- If there was more water weight than wood weight, you would get a moisture content that was greater than 100% (for example, if you had a piece that was 5 lbs of water and 4 lbs of "wood", you'd have a moisture content that was 5/4 or 125%)
I was able to get over my trails to a neighbor's place on Monday to help them start clearing a small pasture in their woods. It's about a mile through the woods, and things were finally cold enough to make that drive. (I don't own a trailer capable of hauling my tractor, and don't like the 6+mile tractor drive over the road even when the weather is good, let alone when all the idiots are out re-learning how to drive in ice and snow.) I needed to work in my own woods yesterday, but didn't get to it. Today, things have softened up too much.BTW - this morning I made one turn on the trail I just packed the other day. . It was 24* here. It was better than expected but a second trip would have been a mistake probably. It warmed up quickly.