Branson parts

[Ronlball]

I'm with Reed and Reed sales in chatsworth, Georgia. We are a Branson tractor dealership that carries most parts for Branson tractors. What we don't carry, there's a good chance I can get. If anyone needs parts we have them. Give us a call at 706-517-8822.

 

[YanmarFever]

Good to know Ron, do you have a web page?

 

[Ronlball]

Good to know Ron, do you have a web page?

Reed and Reed sales.com Our website has only a fraction of what we have in stock. We have the largest stock of Branson parts in the nation except the main warehouse in Rome, Ga.

 

[K5lwq]

But they definitely do not have a upgraded right hand knuckle arm for a 4520. Plenty of left hand though.

 

[Ronlball]

Have you seen the upgraded tie rod end kits that come with new knuckle arms? Not sure if you had seen them, just asking.

 

[Ronlball]

But they definitely do not have a upgraded right hand knuckle arm for a 4520. Plenty of left hand though.

Call me tomorrow with a serial number. I'm almost sure I have new style knuckle arms that come in the kits.

 

[K5lwq]

Have you seen the upgraded tie rod end kits that come with new knuckle arms? Not sure if you had seen them, just asking.

Yes and bought a set from y'all. But it came with two left hand knuckle arms and no right hand. I called and was sent another arm that was in the right side package but it too was a left side packaged wrong. Then I was told that I needed to send that to Branson and they would send the right side when they get more in. Did that and of course still nothing.

I finally took my old one to a machine shop and had it drilled out to fit the new tie rod. But I really would like to have the correct part as it is my intention to sell this tractor to someone else. I am try to make it a reliable tractor with as many OEM parts as possible.

No big deal but did not get what I paid for in this case.

 

[Ronlball]

Yes and bought a set from y'all. But it came with two left hand knuckle arms and no right hand. I called and was sent another arm that was in the right side package but it too was a left side packaged wrong. Then I was told that I needed to send that to Branson and they would send the right side when they get more in. Did that and of course still nothing.

I finally took my old one to a machine shop and had it drilled out to fit the new tie rod. But I really would like to have the correct part as it is my intention to sell this tractor to someone else. I am try to make it a reliable tractor with as many OEM parts as possible.

No big deal but did not get what I paid for in this case.

Give me a call tomorrow and ill make it right with you. I take it Branson didn't send the correct one?

 

[kantuckid]

My concern down the road on the tie rod area is that Bransons have zero guards used to protect the rubber boots. I do the boots listed as a separate part though which isn't true for my Kioti's nor Kubotas which had guards but asked us to buy a complete tie rod assembly, no boots alone. They will be damaged over time exposed as they are!

 

[Number15]

I met these guys when I thought I had a deal on a house in Cleveland TN.

Very nice people and gave me a lot of good information. Showed me a bunch of stuff and answered my sometimes stupid questions without making me feel dumb

Ended up the house I eventually got had a Branson dealer 10 miles away so I purchased from them instead. They were also very helpful.

Just FYI