npalen
Elite Member
All the makings for an industrial size snow blower? Hydrostat, cab, powered spout rotation, heater....(Maybe)The big box on the back is the engine compartment. The only issue I see is getting the snow up into the blower.
Snow Blower Material?
- Thread starter npalen
- Start date
- Views: 2228
All the makings for an industrial size snow blower? Hydrostat, cab, powered spout rotation, heater....(Maybe)The big box on the back is the engine compartment. The only issue I see is getting the snow up into the blower.
Halftrack
Platinum Member
You are looking at a New Idea Uni-system harvester. The original design was a Minneapolis Moline machine which New Idea bought the rights to in 1965. It eventually morphed into pickers, shellers, combine, corn planter, SNOW BLOWER, sprayers, and more. See the attached url Where To Buy Uni Harvester Parts for more info concerning the UNI-SYSTEM or search uni-system. Working units are still available, check TRACTORHOUSE.
Halftrack
Platinum Member
From TRACTORHOUSE just what you asked for--- https://www.tractorhouse.com/listings/farm-equipment/for-sale/207458807/new-idea-800c-uni
OP
npalen
Elite Member
Sorry, but you must not have looked very closely at the photo of the New Holland,
Halftrack
Platinum Member
Thank you, npalen, for correcting me. Your right, I did not look closely at the photo. The uni-system came to mind when you mentioned the snowblower and a skewed path I followed.
OP
npalen
Elite Member
You're welcome. No harm. No foul.
The Uni-system is interesting in itself.
OP
npalen
Elite Member
The unit is for sale if you're that interested!So where's the snowblower??? I'M WAAAAAITINGGGG!!!!
