Larry Caldwell
Elite Member
Photos clearly show rivet heads.
Who Broke The Bridge?
- Thread starter Diggin It
- Start date
- Views: 23179
That's what I thought until I made the pic bigger, do rivets come in hex shape? (curious not being a smart azz) or is it an optical illusion
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,093
- Tractor
- Outlander max 1000 6x6, Ego lawn mower
Look like hex head bolts to me. 
k0ua
Epic Contributor
Well color me stupid. I thought rivets too, but no, they are hex head bolts.
PILOON
Super Star Member
Me stupid also.
But now, are those self tapping?
or is there an access backside to attach nuts not that it matters much as the break is well past those plates.
OP
Diggin It
Super Star Member
Are those hex bolts smart enough to pass their grade 8 exams?
PILOON
Super Star Member
I'm somewhat surprised the fracture occurred past the last row of bolts.
I'd have thought that 8 holes in a row (bolt pattern) would have created a fracture path.
Interesting!
But WOW, what stresses to create a near clean fracture in a 24" X 30" box beam.
As I said, must have sounded like a sonic boom from a jet breaking the sound barrier., especially with that long 24 x 36 sound tube.
Some vehicle drivers must have stained their drawers.
I'd have thought that 8 holes in a row (bolt pattern) would have created a fracture path.
Interesting!
But WOW, what stresses to create a near clean fracture in a 24" X 30" box beam.
As I said, must have sounded like a sonic boom from a jet breaking the sound barrier., especially with that long 24 x 36 sound tube.
Some vehicle drivers must have stained their drawers.
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 12,450
Like I said it's going to be interesting...right now there are so few facts and so much speculation it's funny...!
Samples once taken and examined and tested etc could show a defect in the metal itself when the steel was made or the mill that made the components...nothing to do with the actual application...
Samples once taken and examined and tested etc could show a defect in the metal itself when the steel was made or the mill that made the components...nothing to do with the actual application...
kenmbz
Super Member
- Joined
- May 8, 2019
- Messages
- 6,243
- Location
- S.E. PA
- Tractor
- Massey Ferguson GC1720/Simplicity Regents/Echo CS-490/CS-620
The articles are blaming the center of the M as a flex point. Will be interesting to see if that is really the cause.
If so, quite a few bridges will need to be more thoroughly checked.
I took statics and dynamics in college, why I originally became and electrical engineer, not mechanical
If so, quite a few bridges will need to be more thoroughly checked.
I took statics and dynamics in college, why I originally became and electrical engineer, not mechanical
OP
Diggin It
Super Star Member
Has it been stated that there was such an event? Or was this found during a routine inspection?