They can stick Bobcat tractors where the sun don't shine.

[lilranch2001]

I have only read the first 10 posts, but I agree with several on here, this OP either has the worst Bobcat and Kioti dealer on the face of the earth, or he is an easy mark to be screwed with.

My dealer can get any part I want, and ina reasonable time frame.
Bobcat is spending megabucks rebuilding their tractor line and is not going to let something like this tarnish the brand

 

[ruffdog]

That statement would turn me off from buying a Bobcat Tractor in a heartbeat.......:thumbdown:

I would have to agree^^^. I would wait until the Doosan product comes out instead as a better option.:2cents:

I agree that the OP has an interesting relationship with the local dealerships for some reason.

 

[mike48130]

If you wer closer I would ask what you would sell it for. But about a 13hr drive, so it would have to be cheap.

 

[radios1]

I have only read the first 10 posts, but I agree with several on here, this OP either has the worst Bobcat and Kioti dealer on the face of the earth, or he is an easy mark to be screwed with.

My dealer can get any part I want, and ina reasonable time frame.
Bobcat is spending megabucks rebuilding their tractor line and is not going to let something like this tarnish the brand

ask your dealer if they can get parts for a CT335 that the OP has then!. maybe it needs an engine block.. this way, we can figure out what is going on here!..

 

[lilranch2001]

I do not see where the op has listed anything other than what seems to be a bogus claim

 

[Deere Dude]

For $2000 i would think a fix could be identified, unless I missed it someplace.

 

[lilranch2001]

His whole story makes no sense

 

[k0ua]

His whole story makes no sense

It doesn't to me.

 

[radios1]

I do not see where the op has listed anything other than what seems to be a bogus claim

the CT335 may be unsupported because of it's age, Bobcat did stop making tractors for a long time, and now have a new line!.. like I said before, ask YOUR dealer if the CT335 is still supported!..

 

[Industrial Toys]

I have no doubt at all that even the old established manufacturers will cease support of their products earlier and earlier. Too much technology and associated equipment required for support and things just change too quickly. And the numbers will never justify aftermarket manufactureres like stuff for an 8 or 9N.