rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 12,189
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
21F and partly cloudy. Looks like we got around 3" to 4" of snow overnight ... very light and fluffy. Currently not snowing, but radar shows snow just off to the west.
Winter weather advisory currently in effect, calling for another 3" to 4" ... weather guys say this will be the second Alberta Clipper and that we are due for another one in another couple of days. I may actually have to clear the driveway ...
I figured out what it would take to panel-wise, for the bypass doors up in the shop last night, two 4 x 8 panels will cover it. Was going to go over to the Depot and pick those up today, but I dunno if that will happen at this point.
Need to clear out some space in the garage down here at the house so I can eventually get The Woman's car in. Also should probably fish that snowblower out of the woods before the snow gets so deep I can't get to it. Only issue with that is that there is a widow-maker on the path I have to traverse to get to it: a 10" diameter dead ash tree that broke off about 10' above ground that's leaning over into some other trees. Kinda scary. Fortunately, it is leaning away from the barn.
I also need to do the mod on the loader spool valve that allows water to drain out ... since every time the temp goes below freezing, the curl circuit (at a minimum) freezes up. I think ronjhall may know something about this.
Also need to get some more wood moved inside the shop, as by the end of the day I'll be out ... not to mention that the wood pile will be even more snow covered by tomorrow morning.
Plus The Woman wants some chili ... so I need to whip that up.
Winter weather advisory currently in effect, calling for another 3" to 4" ... weather guys say this will be the second Alberta Clipper and that we are due for another one in another couple of days. I may actually have to clear the driveway ...
I figured out what it would take to panel-wise, for the bypass doors up in the shop last night, two 4 x 8 panels will cover it. Was going to go over to the Depot and pick those up today, but I dunno if that will happen at this point.
Need to clear out some space in the garage down here at the house so I can eventually get The Woman's car in. Also should probably fish that snowblower out of the woods before the snow gets so deep I can't get to it. Only issue with that is that there is a widow-maker on the path I have to traverse to get to it: a 10" diameter dead ash tree that broke off about 10' above ground that's leaning over into some other trees. Kinda scary. Fortunately, it is leaning away from the barn.
I also need to do the mod on the loader spool valve that allows water to drain out ... since every time the temp goes below freezing, the curl circuit (at a minimum) freezes up. I think ronjhall may know something about this.
Also need to get some more wood moved inside the shop, as by the end of the day I'll be out ... not to mention that the wood pile will be even more snow covered by tomorrow morning.
Plus The Woman wants some chili ... so I need to whip that up.