lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 8,078
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Rick,
Here's a pic of the soil screen frame with the 1" screen on it:
View attachment 520878
I actually made an error in my previous description ... the 1" screen has the most 2 x 4's in it ... looks like one every 6" O.C.
I think I did that because I was going to be using it to screen stuff that had some pretty good sized rocks in it and felt it needed the support.
Looked at the gravel screen yesterday (buried behind stuff in the barn) and I think the spacing was 12" O.C. rather than 6" because there really isn't any large rocks in it and I can control the rate at which I dump it.
You can see some of the grass/weeds that gets caught in the screen.
Here's the results. The screened pile in the foreground is about 5' tall and 10' in diameter:
View attachment 520879
The pile in the background has been through the screen several times and still has a lot more in it that could be sifted out. The majority of the screened material isn't any larger than probably 1/2" to 5/8" generally.
The frame that the screens sit on was built from 2 x 2 x 1/8 wall square tube, 10 gauge sheet, and a couple of pieces of 3/8" x 3" (?) x 6' long angle for the two runners on the bottom ... plus a few short pieces of 1/4 x 2 bar stock to keep the screens from sliding off. The 10 gauge is probably overkill ... 12 gauge would probably be fine ... but it should hold up long-term. (Same deal with the 3/8 angle runners ... 1/4 probably would have been fine)
Based on my experiences using a wooden frame for the base (and having to rebuild/repair it a number of times), metal should be much more durable ... particularly if you are going to move it.
Will try to get a few more pics. Let me know if the have any questions.
Thanks RS, very informative. Biggest question is how did you determine the angle of the screens?