My "new to me" 54 blade
- Thread starter 950Tourer
- Start date
- Views: 2920
Yellowfever440
Gold Member
- Joined
- May 28, 2005
- Messages
- 304
When you put the horse mat on, what does that help? I use just the wear strip so the blade scraps up all the packed snow. If I put a wear strip the horse mat and another wearstrip it would prolly make the blade last longer. I am just thinking if you bolt a wear strip to the front of the horse mat with nothing to support the horse mat wouldn't the mat just roll under the moldboard of the plow?
From my understanding, the horse mat is like 3/4" thick. So if you don't make it too long, it can still be pretty stiff. But flexible enough to act like a squeege. It's better for asphalt and concrete driveways I think. When I do mine, I might use wing nuts on the bolts so I can take it off quicker if I want to use just the wear bar if I have ice.
kennyd
Advertiser
Gittyup
Elite Member
- Joined
- Oct 4, 2007
- Messages
- 3,145
- Location
- Mid Atlantic
- Tractor
- Kioti CK25 Shuttle Shift, loaded tires, JD X739
Hard to beat "ready to wear". Bu I can get a whole mat for that, and get 5 or 6 pieces out of it.
I am going to pick up a mat tomorrow at Tractor Supply. We did get some snow, not a lot though. Here's a pic:
My driveway is fairly level til it slopes up to the road. I don't have any chains yet but I do have about 160# of extra weight on the back:
Cost me about $45 and is equal to 4 suitcase weights. Works well.
My driveway is fairly level til it slopes up to the road. I don't have any chains yet but I do have about 160# of extra weight on the back:
Cost me about $45 and is equal to 4 suitcase weights. Works well.
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Our TSC has mat material in various thickness' in rolls that you can buy by the foot. Starts out at about 3/8" as I recall.
