Remember the '57 Chevrolet?

   / Remember the '57 Chevrolet? #21  
No, I'm way too young to have any clue what you're talking about, but since you brought it up, how many had to actually change a bad condenser? And how many just did them along with the points (at least every other time)?

The points and condenser usually were packaged together on a card. Really didn't have to change the condenser often, but what to do with a drawer full of unused ones, and they only took a minute to change :)
Then came vented points....
 
   / Remember the '57 Chevrolet? #22  
Hilite of driving my 56 chev came in the old days in Montana with no speed limit (reasonable and proper). I wonder what they would have said to my trip across there in a 54 chev with a motorcycle stuffed in the back seat, trunk full of all my belongings (station transfer in the AF), nose pointed at the tree tops and speedo reading "reasonable).

Anyhow with the 57 chev I took a pheasant at a ways north of 70 . Hit and put a dent at the top corner of the windshield but CSI says it hit first on that pointy spear on the hood which must have just about cleaned it out, blood, guts and gore everywhere.

Another thrill of driving Montana back in those days was topping a hill going like a bat and seeing a flock of sheep - open range then. For some reason I never figured out, the flock was always going the same direction I was which made it real fun (and slow) to get through them.

Harry K
 
   / Remember the '57 Chevrolet? #23  
   / Remember the '57 Chevrolet? #24  
Really didn't have to change the condenser often, but what to do with a drawer full of unused ones,

used to be lots of condensers laying around the garage we hung out at back in the 60's...
we'd pull a plug wire on a running engine, hold the condenser in series with the plug wire to ground, charging up the condenser. Then we'd leave it on the counter beside the cash register.
just about every guy who came in to pay his bill would pick up a condenser to look at it, and then he would touch the end of the lead with his other hand and get a healthy poke...
always good for a laugh.

Pete
 
   / Remember the '57 Chevrolet? #25  
My first car in 1966 was a Mercury. I think it was a 57 but then memory escapes so it could have been a 58'. Cost me a hundred bucks and it was decent too. I think the engine was like a 330 or something? It could see a hundred real quick much to my dad's disatifaction with me. Weak link was the push button controlled auto. Like the song says, "crazy about a Mercury".

The older guys with a little better job had the Mercs. The rest of us had Fords (or Chevy's)

But, back to the topic, the 57 Chevy. I left one sit in a friends field. Don't know what ever happened to that car. It was a four door which was not cool. I don't even remember how I came to own it.

I also had a 55 Crown Vic, a 60 T-bird rag but with the hard boot, a 55 and a 56 Chevy. Also had a 56 Chevy delivery wagon with no drive train that I swapped for bucket seats.
 
   / Remember the '57 Chevrolet? #26  
My first car in 1966 was a Mercury. I think it was a 57 but then memory escapes so it could have been a 58'. Cost me a hundred bucks and it was decent too. I think the engine was like a 330 or something? It could see a hundred real quick much to my dad's disatifaction with me. Weak link was the push button controlled auto. Like the song says, "crazy about a Mercury".

I think, not absolutely sure, that my '56 Merc had a 312 engine, and of course a 4 bbl carb. I can't recall a Merc with a push button auto. I've driven Edsels with the push button in the center of the steering wheel and Plymouths with the push buttons to the left of the steering wheel.
 
   / Remember the '57 Chevrolet? #27  
I think, not absolutely sure, that my '56 Merc had a 312 engine, and of course a 4 bbl carb. I can't recall a Merc with a push button auto. I've driven Edsels with the push button in the center of the steering wheel and Plymouths with the push buttons to the left of the steering wheel.

Push-button automatics were never a favorite of mine. Today's push button engine starts aren't either. I can't get used to getting into the car with the key in my pocket and reaching up to start the engine because the key is "present." I hope that trend goes the way of the push-button transmission.:mad:
 
   / Remember the '57 Chevrolet? #28  
Push-button automatics were never a favorite of mine. Today's push button engine starts aren't either. I can't get used to getting into the car with the key in my pocket and reaching up to start the engine because the key is "present." I hope that trend goes the way of the push-button transmission.:mad:

Yep. With all the reports of "runaway acceleration" and being unable to stop the engine it seems a bad idea. My understanding is to stop the engine you need to push AND HOLD the button for some seconds. When I want to turn off an engine I want it to stop NOW!.

Harry K
 
   / Remember the '57 Chevrolet? #29  
As a kid I always liked the '57 since it is my "born on date". So when I got my license I dragged dad to one of those little used car lots on Canal St in New Orleans to look at one. It was a 2-door and had a real amature bright orange paint job & I think the asking price was $650..this was 1974. Unfortunately for me, my grandfather owned a used car dealership & Dad worked for him for several years. So Dad went around the car point out the host of "flaws" like rust through that had been merely painted over. A dejected teenager went home with no car and still to this day a '57 has not graced my driveway:(
 
   / Remember the '57 Chevrolet? #30  
The points and condenser usually were packaged together on a card. Really didn't have to change the condenser often, but what to do with a drawer full of unused ones, and they only took a minute to change :)
Then came vented points....

I remember there was a store near me that would sell the points alone. Just had to ask for them and they had a whole drawer full of them somewhere. It was a couple of years ago, so I don't remember all the details, but it started out as a way to carry a spare set of points, and ended up being a cheaper way for a tune up. I'm a pack rat so I still had several old condensers laying around that were still just fine in case one ever did go out.

I changed them every once in a while because it seemed like the right thing to do, but I don't remember anyone having one actually fail.
 

Tractor & Equipment Auctions

2011 Ford F-250 Omaha Service Truck (A50323)
2011 Ford F-250...
2012 WESTERN STAR 4900 SB (A50854)
2012 WESTERN STAR...
7046 (A50322)
7046 (A50322)
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
2017 Buick Regal Sedan (A50324)
2017 Buick Regal...
2022 FORD F-150 LARIAT CREW CAB TRUCK (A51406)
2022 FORD F-150...
 
Top